APRS Track Direct

My position About ☰

reset

HS6AU-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS6AU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1762263067	7 Pkt	0 Pkt	-59 dBm	14.64 V
1762262744	6 Pkt	0 Pkt	-59 dBm	14.6 V
1762262420	8 Pkt	1 Pkt	-60 dBm	14.64 V
1762262096	5 Pkt	0 Pkt	-59 dBm	14.58 V
1762261773	7 Pkt	0 Pkt	-62 dBm	14.58 V
1762261449	7 Pkt	0 Pkt	-61 dBm	14.56 V
1762261125	9 Pkt	0 Pkt	-61 dBm	14.62 V
1762260801	5 Pkt	0 Pkt	-62 dBm	14.62 V
1762260477	11 Pkt	0 Pkt	-62 dBm	14.62 V
1762260153	6 Pkt	0 Pkt	-61 dBm	14.64 V
1762259830	7 Pkt	0 Pkt	-59 dBm	14.6 V
1762259506	6 Pkt	0 Pkt	-60 dBm	14.6 V
1762259183	8 Pkt	0 Pkt	-59 dBm	14.6 V
1762258859	6 Pkt	0 Pkt	-60 dBm	14.56 V
1762258535	6 Pkt	0 Pkt	-59 dBm	14.56 V
1762258212	8 Pkt	0 Pkt	-59 dBm	14.6 V
1762257888	8 Pkt	0 Pkt	-60 dBm	14.6 V
1762257564	7 Pkt	0 Pkt	-60 dBm	14.64 V
1762257241	9 Pkt	0 Pkt	-60 dBm	14.58 V
1762256917	7 Pkt	0 Pkt	-60 dBm	14.6 V
1762256594	6 Pkt	1 Pkt	-60 dBm	14.62 V
1762256270	7 Pkt	0 Pkt	-59 dBm	14.6 V
1762255946	7 Pkt	0 Pkt	-59 dBm	14.56 V
1762255622	5 Pkt	0 Pkt	-59 dBm	14.62 V
1762255299	8 Pkt	0 Pkt	-59 dBm	14.6 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)