This is the latest recevied telemetry packets stored in our database for station/object BM4LUN-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | ALL_PKTS_10M* | FWD_APRS_10M* | POS_PKTS_10M* | MSG_PKTS_10M* | CTRL_PKTS_10M* |
|---|---|---|---|---|---|
| 1762288125 | 23 cnt | 4 cnt | 20 cnt | 0 cnt | 3 cnt |
| 1762287525 | 31 cnt | 5 cnt | 28 cnt | 1 cnt | 2 cnt |
| 1762286925 | 31 cnt | 1 cnt | 27 cnt | 0 cnt | 4 cnt |
| 1762286325 | 35 cnt | 1 cnt | 31 cnt | 0 cnt | 4 cnt |
| 1762285725 | 42 cnt | 2 cnt | 38 cnt | 1 cnt | 3 cnt |
| 1762285125 | 57 cnt | 4 cnt | 51 cnt | 1 cnt | 5 cnt |
| 1762284525 | 50 cnt | 3 cnt | 45 cnt | 0 cnt | 5 cnt |
| 1762283925 | 38 cnt | 3 cnt | 34 cnt | 0 cnt | 4 cnt |
| 1762283325 | 51 cnt | 7 cnt | 45 cnt | 1 cnt | 5 cnt |
| 1762282725 | 45 cnt | 5 cnt | 36 cnt | 1 cnt | 8 cnt |
| 1762282125 | 46 cnt | 7 cnt | 45 cnt | 1 cnt | 0 cnt |
| 1762281525 | 42 cnt | 8 cnt | 36 cnt | 1 cnt | 5 cnt |
| 1762280925 | 36 cnt | 4 cnt | 32 cnt | 0 cnt | 4 cnt |
| 1762280325 | 49 cnt | 11 cnt | 46 cnt | 1 cnt | 2 cnt |
| 1762279725 | 38 cnt | 5 cnt | 32 cnt | 1 cnt | 5 cnt |
| 1762279125 | 41 cnt | 2 cnt | 40 cnt | 0 cnt | 1 cnt |
| 1762278525 | 40 cnt | 5 cnt | 38 cnt | 0 cnt | 2 cnt |
| 1762277925 | 33 cnt | 2 cnt | 31 cnt | 1 cnt | 1 cnt |
| 1762277325 | 45 cnt | 8 cnt | 42 cnt | 1 cnt | 2 cnt |
| 1762276725 | 35 cnt | 9 cnt | 33 cnt | 1 cnt | 1 cnt |
| 1762276125 | 39 cnt | 5 cnt | 37 cnt | 1 cnt | 1 cnt |
| 1762275525 | 38 cnt | 3 cnt | 34 cnt | 0 cnt | 4 cnt |
| 1762274925 | 34 cnt | 5 cnt | 33 cnt | 1 cnt | 0 cnt |
| 1762274325 | 36 cnt | 2 cnt | 34 cnt | 1 cnt | 1 cnt |
| 1762273725 | 26 cnt | 1 cnt | 24 cnt | 0 cnt | 2 cnt |
*Used Equation Coefficients:
ALL_PKTS_10M: 0, 1, 0
FWD_APRS_10M: 0, 1, 0
POS_PKTS_10M: 0, 1, 0
MSG_PKTS_10M: 0, 1, 0
CTRL_PKTS_10M: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)