APRS Track Direct

My position About ☰

reset

VK2AMW-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2AMW-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	DgS1h*	Rx10m*	Dg10m*
1774124336	13.5 Volt	240 Pkt	27.67 Pcnt	28 Pkt	20 Pkt
1774124333	13.5 Volt	240 Pkt	27.67 Pcnt	28 Pkt	20 Pkt
1774124033	13.5 Volt	250 Pkt	28.33 Pcnt	32 Pkt	20 Pkt
1774123736	13.5 Volt	260 Pkt	29.34 Pcnt	37 Pkt	23 Pkt
1774123733	13.5 Volt	260 Pkt	29.34 Pcnt	37 Pkt	23 Pkt
1774123433	13.5 Volt	260 Pkt	29.71 Pcnt	43 Pkt	29 Pkt
1774123134	13.5 Volt	250 Pkt	29.04 Pcnt	48 Pkt	31 Pkt
1774123133	13.5 Volt	250 Pkt	29.04 Pcnt	48 Pkt	31 Pkt
1774122833	13.5 Volt	260 Pkt	29.19 Pcnt	52 Pkt	32 Pkt
1774122535	13.5 Volt	230 Pkt	28.84 Pcnt	33 Pkt	28 Pkt
1774122533	13.5 Volt	230 Pkt	28.84 Pcnt	33 Pkt	28 Pkt
1774122233	13.5 Volt	230 Pkt	26.54 Pcnt	33 Pkt	24 Pkt
1774121935	13.5 Volt	230 Pkt	25.92 Pcnt	36 Pkt	25 Pkt
1774121933	13.5 Volt	230 Pkt	25.92 Pcnt	36 Pkt	25 Pkt
1774121633	13.43 Volt	220 Pkt	25.08 Pcnt	35 Pkt	27 Pkt
1774121334	13.5 Volt	220 Pkt	24.75 Pcnt	38 Pkt	29 Pkt
1774121333	13.5 Volt	220 Pkt	24.75 Pcnt	38 Pkt	29 Pkt
1774121033	13.35 Volt	220 Pkt	24.17 Pcnt	44 Pkt	29 Pkt
1774120734	13.5 Volt	220 Pkt	24.58 Pcnt	47 Pkt	33 Pkt
1774120733	13.5 Volt	220 Pkt	24.58 Pcnt	47 Pkt	33 Pkt
1774120433	13.35 Volt	220 Pkt	24.84 Pcnt	47 Pkt	32 Pkt
1774120136	13.5 Volt	210 Pkt	24.41 Pcnt	29 Pkt	18 Pkt
1774120133	13.5 Volt	210 Pkt	24.41 Pcnt	29 Pkt	18 Pkt
1774119833	13.5 Volt	220 Pkt	25.04 Pcnt	35 Pkt	26 Pkt
1774119534	13.5 Volt	230 Pkt	27.15 Pcnt	34 Pkt	24 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

DgS1h: 0, 0.001, 0

Rx10m: 0, 1, 0

Dg10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)