This is the latest recevied telemetry packets stored in our database for station/object SP2ARK-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Bat* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762324238 | 3.77 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1762324157 | 3.77 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1762324144 | 3.77 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1762323695 | 3.78 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1762323484 | 3.79 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1762323409 | 3.79 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1762323231 | 3.8 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1762322855 | 3.85 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1762322734 | 3.93 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1762322613 | 3.91 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1762322563 | 3.66 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1762322343 | 3.52 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1762321576 | 3.42 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1762321367 | 3.52 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1762320466 | 3.49 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1762319564 | 3.45 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1762318663 | 3.49 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1762317762 | 3.5 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1762316861 | 3.52 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1762315959 | 3.5 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1762315058 | 3.49 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1762314157 | 3.48 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1762313255 | 3.52 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1762312354 | 3.5 VDC | 0.08 VDC | 0 | 0 | 0 |
| 1762311453 | 3.5 VDC | 0.08 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)