APRS Track Direct

My position About ☰

reset

IR2ZZN-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2ZZN-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Rx10*
1750172194	14.06 Volt	20 Pkt	10 Pkt	100 Pcnt	3 Pkt
1750171894	14.06 Volt	30 Pkt	10 Pkt	100 Pcnt	3 Pkt
1750171594	14.06 Volt	30 Pkt	20 Pkt	95 Pcnt	2 Pkt
1750171294	14.06 Volt	40 Pkt	20 Pkt	95 Pcnt	8 Pkt
1750170995	14.06 Volt	40 Pkt	30 Pkt	93 Pcnt	8 Pkt
1750170696	14.06 Volt	40 Pkt	30 Pkt	93 Pcnt	2 Pkt
1750170395	14.06 Volt	40 Pkt	30 Pkt	92 Pcnt	3 Pkt
1750170095	14.06 Volt	40 Pkt	30 Pkt	92 Pcnt	2 Pkt
1750169795	13.98 Volt	40 Pkt	30 Pkt	92 Pcnt	2 Pkt
1750169495	14.06 Volt	40 Pkt	30 Pkt	90 Pcnt	9 Pkt
1750169195	14.06 Volt	40 Pkt	30 Pkt	90 Pcnt	9 Pkt
1750168895	14.06 Volt	40 Pkt	30 Pkt	89 Pcnt	5 Pkt
1750168595	14.06 Volt	40 Pkt	30 Pkt	88 Pcnt	12 Pkt
1750168295	14.06 Volt	40 Pkt	30 Pkt	88 Pcnt	13 Pkt
1750167995	14.06 Volt	40 Pkt	20 Pkt	91 Pcnt	9 Pkt
1750167695	14.06 Volt	40 Pkt	20 Pkt	91 Pcnt	10 Pkt
1750167395	14.06 Volt	30 Pkt	20 Pkt	90 Pcnt	10 Pkt
1750167095	14.06 Volt	30 Pkt	20 Pkt	90 Pcnt	3 Pkt
1750166795	14.06 Volt	30 Pkt	20 Pkt	92 Pcnt	2 Pkt
1750166495	14.06 Volt	40 Pkt	20 Pkt	91 Pcnt	3 Pkt
1750166195	14.06 Volt	40 Pkt	20 Pkt	91 Pcnt	2 Pkt
1750165895	14.06 Volt	40 Pkt	30 Pkt	93 Pcnt	7 Pkt
1750165595	14.06 Volt	40 Pkt	30 Pkt	93 Pcnt	9 Pkt
1750165295	14.06 Volt	40 Pkt	30 Pkt	89 Pcnt	7 Pkt
1750164995	14.06 Volt	40 Pkt	30 Pkt	91 Pcnt	8 Pkt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Rx10: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)