This is the latest recevied telemetry packets stored in our database for station/object IK5XMK-21. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1774102033 | 915.1 hPa | 11 C deg | 55.1 % | 1014.1 hPa | 0 C deg |
| 1774098398 | 915.3 hPa | 11.1 C deg | 55.1 % | 1014.4 hPa | 0 C deg |
| 1774094774 | 915.7 hPa | 11.1 C deg | 55.1 % | 1014.8 hPa | 0 C deg |
| 1774091150 | 916.1 hPa | 11.1 C deg | 54.6 % | 1015.2 hPa | 0 C deg |
| 1774085688 | 916.6 hPa | 11.2 C deg | 54.5 % | 1015.8 hPa | 0 C deg |
| 1774072979 | 916.6 hPa | 11.3 C deg | 54.4 % | 1015.7 hPa | 0 C deg |
| 1774060271 | 917.1 hPa | 11.2 C deg | 54.8 % | 1016.3 hPa | 0 C deg |
| 1774058457 | 917.3 hPa | 11.2 C deg | 54.7 % | 1016.5 hPa | 0 C deg |
| 1774056646 | 917.5 hPa | 11.2 C deg | 54.7 % | 1016.7 hPa | 0 C deg |
| 1774040300 | 918.1 hPa | 11.2 C deg | 55.5 % | 1017.5 hPa | 0 C deg |
| 1774034870 | 918 hPa | 11.1 C deg | 55.7 % | 1017.4 hPa | 0 C deg |
| 1774029408 | 917.8 hPa | 11.2 C deg | 55.4 % | 1017.1 hPa | 0 C deg |
| 1774027586 | 917.8 hPa | 11.2 C deg | 55.5 % | 1017.1 hPa | 0 C deg |
| 1774023961 | 917.7 hPa | 11.1 C deg | 55.9 % | 1017 hPa | 0 C deg |
| 1774020334 | 917.7 hPa | 11.2 C deg | 55.8 % | 1017 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)