This is the latest recevied telemetry packets stored in our database for station/object VK4JRO-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794913086 | 122 | 255 | 243 | 241 | 240 |
| 1794911283 | 122 | 255 | 243 | 241 | 241 |
| 1794909449 | 122 | 255 | 243 | 242 | 241 |
| 1794907648 | 122 | 255 | 243 | 242 | 241 |
| 1794905847 | 122 | 255 | 243 | 242 | 241 |
| 1794904046 | 122 | 255 | 243 | 242 | 241 |
| 1794902225 | 115 | 255 | 244 | 243 | 242 |
| 1794900415 | 122 | 255 | 243 | 242 | 241 |
| 1794898612 | 115 | 255 | 244 | 242 | 242 |
| 1794896801 | 124 | 255 | 243 | 242 | 241 |
| 1794895000 | 126 | 255 | 243 | 242 | 241 |
| 1794893199 | 126 | 255 | 243 | 242 | 241 |
| 1794891398 | 126 | 255 | 243 | 242 | 241 |
| 1794889580 | 126 | 255 | 243 | 242 | 241 |
| 1794887735 | 120 | 255 | 243 | 242 | 241 |
| 1794885933 | 127 | 255 | 243 | 242 | 241 |
| 1794882328 | 127 | 255 | 243 | 241 | 240 |
| 1794880525 | 127 | 255 | 243 | 241 | 241 |
| 1794878724 | 127 | 255 | 243 | 241 | 240 |
| 1794876923 | 127 | 255 | 243 | 241 | 240 |
| 1794875122 | 127 | 255 | 243 | 241 | 240 |
| 1794873320 | 127 | 255 | 243 | 241 | 240 |
| 1794871520 | 135 | 255 | 243 | 241 | 240 |
| 1794869719 | 135 | 255 | 242 | 241 | 240 |
| 1794867918 | 131 | 255 | 243 | 241 | 240 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)