APRS Track Direct

My position About ☰

reset

E24QND-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E24QND-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1836274407	0 Pkt	0 Pkt	0 Pkt	-85 dBm	0 V
1836273932	0 Pkt	0 Pkt	0 Pkt	-84 dBm	0 V
1762262040	0 Pkt	0 Pkt	0 Pkt	-77 dBm	0 V
1762260815	0 Pkt	0 Pkt	0 Pkt	-76 dBm	0 V
1762259591	0 Pkt	0 Pkt	0 Pkt	-79 dBm	0 V
1762258366	0 Pkt	0 Pkt	0 Pkt	-76 dBm	0 V
1762257142	0 Pkt	0 Pkt	0 Pkt	-78 dBm	0 V
1762255917	0 Pkt	0 Pkt	0 Pkt	-77 dBm	0 V
1762254693	0 Pkt	0 Pkt	0 Pkt	-77 dBm	0 V
1762253468	0 Pkt	0 Pkt	0 Pkt	-77 dBm	0 V
1762252244	0 Pkt	0 Pkt	0 Pkt	-77 dBm	0 V
1762251019	0 Pkt	0 Pkt	0 Pkt	-76 dBm	0 V
1762249795	0 Pkt	0 Pkt	0 Pkt	-76 dBm	0 V
1762248570	0 Pkt	0 Pkt	0 Pkt	-75 dBm	0 V
1762247346	0 Pkt	0 Pkt	0 Pkt	-75 dBm	0 V
1762246121	0 Pkt	0 Pkt	0 Pkt	-75 dBm	0 V
1762244897	0 Pkt	0 Pkt	0 Pkt	-75 dBm	0 V
1762243672	0 Pkt	0 Pkt	0 Pkt	-74 dBm	0 V
1762242447	0 Pkt	0 Pkt	0 Pkt	-74 dBm	0 V
1762241223	0 Pkt	0 Pkt	0 Pkt	-75 dBm	0 V
1762239998	0 Pkt	0 Pkt	0 Pkt	-74 dBm	0 V
1762238774	0 Pkt	0 Pkt	0 Pkt	-76 dBm	0 V
1762237549	0 Pkt	0 Pkt	0 Pkt	-74 dBm	0 V
1762236325	0 Pkt	0 Pkt	0 Pkt	-77 dBm	0 V
1762235100	0 Pkt	0 Pkt	0 Pkt	-74 dBm	0 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)