This is the latest recevied telemetry packets stored in our database for station/object SV1AMY-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Avg 10m* | Avg 10m* | RxPkts* | IGateDropRx* | TxPkts* | 
|---|---|---|---|---|---|
| 1836274516 | 0 Rx Erlang | 0.01 Tx Erlang | 0 count/10m | 0 count/10m | 10 count/10m | 
| 1836274066 | 0 Rx Erlang | 0.01 Tx Erlang | 0 count/10m | 0 count/10m | 7 count/10m | 
| 1762268274 | 0.1 Rx Erlang | 0.05 Tx Erlang | 84 count/10m | 48 count/10m | 37 count/10m | 
| 1762267074 | 0.09 Rx Erlang | 0.06 Tx Erlang | 61 count/10m | 18 count/10m | 38 count/10m | 
| 1762265874 | 0.07 Rx Erlang | 0.04 Tx Erlang | 69 count/10m | 0 count/10m | 34 count/10m | 
| 1762264674 | 0.07 Rx Erlang | 0.04 Tx Erlang | 64 count/10m | 0 count/10m | 33 count/10m | 
| 1762263474 | 0.1 Rx Erlang | 0.13 Tx Erlang | 76 count/10m | 34 count/10m | 101 count/10m | 
| 1762262274 | 0.1 Rx Erlang | 0.13 Tx Erlang | 80 count/10m | 42 count/10m | 116 count/10m | 
| 1762261074 | 0.14 Rx Erlang | 0.17 Tx Erlang | 118 count/10m | 98 count/10m | 168 count/10m | 
| 1762259874 | 0.14 Rx Erlang | 0.18 Tx Erlang | 126 count/10m | 109 count/10m | 184 count/10m | 
| 1762258674 | 0.13 Rx Erlang | 0.12 Tx Erlang | 116 count/10m | 90 count/10m | 112 count/10m | 
| 1762257474 | 0.12 Rx Erlang | 0.09 Tx Erlang | 104 count/10m | 74 count/10m | 86 count/10m | 
| 1762256274 | 0.11 Rx Erlang | 0.05 Tx Erlang | 87 count/10m | 46 count/10m | 39 count/10m | 
| 1762255074 | 0.1 Rx Erlang | 0.04 Tx Erlang | 84 count/10m | 38 count/10m | 33 count/10m | 
| 1762253874 | 0.09 Rx Erlang | 0.04 Tx Erlang | 79 count/10m | 35 count/10m | 34 count/10m | 
| 1762252674 | 0.1 Rx Erlang | 0.05 Tx Erlang | 76 count/10m | 39 count/10m | 41 count/10m | 
| 1762251474 | 0.1 Rx Erlang | 0.04 Tx Erlang | 79 count/10m | 46 count/10m | 33 count/10m | 
| 1762250274 | 0.1 Rx Erlang | 0.05 Tx Erlang | 77 count/10m | 45 count/10m | 40 count/10m | 
| 1762249074 | 0.11 Rx Erlang | 0.05 Tx Erlang | 82 count/10m | 49 count/10m | 37 count/10m | 
| 1762247874 | 0.1 Rx Erlang | 0.05 Tx Erlang | 76 count/10m | 47 count/10m | 37 count/10m | 
| 1762246674 | 0.1 Rx Erlang | 0.04 Tx Erlang | 77 count/10m | 45 count/10m | 35 count/10m | 
| 1762245474 | 0.11 Rx Erlang | 0.03 Tx Erlang | 86 count/10m | 57 count/10m | 24 count/10m | 
| 1762244274 | 0.09 Rx Erlang | 0.04 Tx Erlang | 72 count/10m | 37 count/10m | 30 count/10m | 
| 1762243074 | 0.12 Rx Erlang | 0.04 Tx Erlang | 91 count/10m | 59 count/10m | 28 count/10m | 
| 1762241874 | 0.12 Rx Erlang | 0.03 Tx Erlang | 95 count/10m | 55 count/10m | 24 count/10m | 
                        *Used Equation Coefficients:
                    
                    
                        Avg 10m: 0, 0.005, 0                    
                    
                        Avg 10m: 0, 0.005, 0                    
                    
                        RxPkts: 0, 1, 0                    
                    
                        IGateDropRx: 0, 1, 0                    
                    
                        TxPkts: 0, 1, 0                    
                - The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
 - Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
 - The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
 - All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
 - A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)