This is the latest recevied telemetry packets stored in our database for station/object W9EN-44. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1782510690 | 4.21 VDC | 20.12 VDC | 0 | 0 | 0 |
| 1782509790 | 4.23 VDC | 20.16 VDC | 0 | 0 | 0 |
| 1782508889 | 4.25 VDC | 20.2 VDC | 0 | 0 | 0 |
| 1782507988 | 4.24 VDC | 18.56 VDC | 0 | 0 | 0 |
| 1782507088 | 4.17 VDC | 20.32 VDC | 0 | 0 | 0 |
| 1782506187 | 4.18 VDC | 20.22 VDC | 0 | 0 | 0 |
| 1782505287 | 4.19 VDC | 20.34 VDC | 0 | 0 | 0 |
| 1782504387 | 4.19 VDC | 20.28 VDC | 0 | 0 | 0 |
| 1782503487 | 4.2 VDC | 20.26 VDC | 0 | 0 | 0 |
| 1782502587 | 4.2 VDC | 20.08 VDC | 0 | 0 | 0 |
| 1782501687 | 4.21 VDC | 20.22 VDC | 0 | 0 | 0 |
| 1782500786 | 4.22 VDC | 20.12 VDC | 0 | 0 | 0 |
| 1782499886 | 4.25 VDC | 20.36 VDC | 0 | 0 | 0 |
| 1782498986 | 4.23 VDC | 5.48 VDC | 0 | 0 | 0 |
| 1782498086 | 4.19 VDC | 5.48 VDC | 0 | 0 | 0 |
| 1782497185 | 4.17 VDC | 5.48 VDC | 0 | 0 | 0 |
| 1782496285 | 4.15 VDC | 5.48 VDC | 0 | 0 | 0 |
| 1782495384 | 4.14 VDC | 5.48 VDC | 0 | 0 | 0 |
| 1782494484 | 4.13 VDC | 5.46 VDC | 0 | 0 | 0 |
| 1782493584 | 4.11 VDC | 5.48 VDC | 0 | 0 | 0 |
| 1782492684 | 4.1 VDC | 5.46 VDC | 0 | 0 | 0 |
| 1782491784 | 4.1 VDC | 5.46 VDC | 0 | 0 | 0 |
| 1782490884 | 4.07 VDC | 5.46 VDC | 0 | 0 | 0 |
| 1782489983 | 4.05 VDC | 5.46 VDC | 0 | 0 | 0 |
| 1782489083 | 4.06 VDC | 5.46 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)