APRS Track Direct

My position About ☰

reset

F5ZYP-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F5ZYP-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	A5*
1790639732	13.8 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1790639433	13.8 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1790639432	13.8 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1790639132	13.8 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1790638832	13.8 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1790638832	13.8 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1790638532	13.8 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1790638233	13.8 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1790638232	13.8 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1790637932	13.8 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1790637633	13.8 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1790637632	13.8 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1790637332	13.8 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1790637032	13.8 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1790637032	13.8 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1790636732	13.8 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1790636433	13.8 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1790636432	13.8 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1790636132	13.8 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1790635833	13.8 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1790635832	13.8 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1790635532	13.8 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1790635233	13.8 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1790635232	13.8 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1790634932	13.8 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)