This is the latest recevied telemetry packets stored in our database for station/object SP6PCL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782478870 | 849 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1782477070 | 848 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1782475269 | 847 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1782473468 | 846 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1782471668 | 845 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1782469867 | 844 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1782468066 | 843 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1782466266 | 842 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1782464465 | 841 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1782462664 | 840 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1782460864 | 839 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1782459063 | 838 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1782457270 | 837 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1782455469 | 836 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1782453668 | 835 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1782451868 | 834 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1782450067 | 833 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1782448266 | 832 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1782446466 | 831 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1782444665 | 830 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1782442864 | 829 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1782441064 | 828 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1782439263 | 827 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1782437463 | 826 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1782435669 | 825 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)