This is the latest recevied telemetry packets stored in our database for station/object DB0SIX-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732272855 | 1.5 deg C | 82 % | 1010 hPa | 0 | 0 |
| 1732271955 | 1.6 deg C | 81.9 % | 1009.5 hPa | 0 | 0 |
| 1732271055 | 1.5 deg C | 81.3 % | 1010.5 hPa | 0 | 0 |
| 1732270155 | 1.6 deg C | 81.1 % | 1008.7 hPa | 0 | 0 |
| 1732269255 | 1.5 deg C | 81.1 % | 1009.2 hPa | 0 | 0 |
| 1732268355 | 1.5 deg C | 80.9 % | 1009.1 hPa | 0 | 0 |
| 1732267455 | 1 deg C | 81 % | 1008.7 hPa | 0 | 0 |
| 1732266555 | 0.9 deg C | 81.2 % | 1009.8 hPa | 0 | 0 |
| 1732265654 | 0.8 deg C | 81.2 % | 1008.6 hPa | 0 | 0 |
| 1732264754 | 0.7 deg C | 81 % | 1008.3 hPa | 0 | 0 |
| 1732263854 | 0.5 deg C | 80.2 % | 1008.1 hPa | 0 | 0 |
| 1732262954 | 0.5 deg C | 79.6 % | 1007.7 hPa | 0 | 0 |
| 1732262054 | -0.1 deg C | 82 % | 1009.2 hPa | 0 | 0 |
| 1732261154 | -0.3 deg C | 82.6 % | 1009.4 hPa | 0 | 0 |
| 1732260254 | -0.4 deg C | 82.8 % | 1009 hPa | 0 | 0 |
| 1732259354 | -0.5 deg C | 83.3 % | 1007.9 hPa | 0 | 0 |
| 1732258454 | -0.6 deg C | 83.1 % | 1007 hPa | 0 | 0 |
| 1732257553 | -0.6 deg C | 82.5 % | 1007.4 hPa | 0 | 0 |
| 1732256653 | -0.5 deg C | 81.7 % | 1007.2 hPa | 0 | 0 |
| 1732255753 | -0.5 deg C | 81.3 % | 1006.7 hPa | 0 | 0 |
| 1732254853 | -0.2 deg C | 80.2 % | 1010.1 hPa | 0 | 0 |
| 1732253953 | -0.2 deg C | 79.4 % | 1005.1 hPa | 0 | 0 |
| 1732253053 | 0 deg C | 78.4 % | 1007.4 hPa | 0 | 0 |
| 1732252153 | 0 deg C | 79.4 % | 1008.1 hPa | 0 | 0 |
| 1732251253 | 0 deg C | 79.6 % | 1006.5 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)