APRS Track Direct

My position About ☰

reset

HS9BZG Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS9BZG. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	BAR*	BAT*
1770108622	44.78 °C	25.9 %RH	993.4 hPa	4.17 V
1770108022	43.93 °C	26.6 %RH	993.5 hPa	4.17 V
1770107451	44.58 °C	26.3 %RH	993.6 hPa	4.17 V
1770106822	44.05 °C	26.8 %RH	993.7 hPa	4.18 V
1770106222	44 °C	27.1 %RH	993.8 hPa	4.17 V
1770105635	43.31 °C	27.8 %RH	993.9 hPa	4.17 V
1770105022	42.67 °C	28.4 %RH	994 hPa	4.16 V
1770104422	41.97 °C	29 %RH	994.2 hPa	4.16 V
1770103823	41.32 °C	29.6 %RH	994.4 hPa	4.16 V
1770103222	40.82 °C	30.4 %RH	994.6 hPa	4.16 V
1770102622	40.01 °C	31.4 %RH	994.8 hPa	4.16 V
1770102022	39.03 °C	32.6 %RH	995 hPa	4.16 V
1770101422	37.58 °C	34 %RH	995.2 hPa	4.09 V
1770100822	36.87 °C	34.6 %RH	995.4 hPa	4.11 V
1770100296	36.62 °C	34.9 %RH	995.6 hPa	4.17 V
1770099622	35.82 °C	35.8 %RH	995.8 hPa	4.16 V
1770099022	34.97 °C	37.1 %RH	996 hPa	4.16 V
1770098429	34.23 °C	38.2 %RH	996.1 hPa	4.16 V
1770097822	34.02 °C	38.6 %RH	996.3 hPa	4.16 V
1770097222	33.9 °C	38.9 %RH	996.4 hPa	4.16 V
1770096621	33.78 °C	39.3 %RH	996.6 hPa	4.16 V
1770096022	33.62 °C	39.5 %RH	996.8 hPa	4.16 V
1770095421	33.47 °C	39.6 %RH	996.9 hPa	4.16 V
1770094822	33.34 °C	39.8 %RH	997.1 hPa	4.16 V
1770094221	33.2 °C	39.9 %RH	997.3 hPa	4.16 V

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

BAR: 0, 0.1, 800

BAT: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)