This is the latest recevied telemetry packets stored in our database for station/object DL2RN-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | eGAS* | Temp.out* |
|---|---|---|---|---|---|
| 1770157925 | 942.3 hPa | 22.3 C deg | 44.3 % | 185 - | 0 C deg |
| 1770154292 | 942.5 hPa | 23 C deg | 43.6 % | 179 - | 0 C deg |
| 1770152483 | 942.7 hPa | 22.9 C deg | 44 % | 178 - | 0 C deg |
| 1770147029 | 942.4 hPa | 22.7 C deg | 44.1 % | 183 - | 0 C deg |
| 1770134332 | 940.6 hPa | 23.5 C deg | 39.6 % | 198 - | 0 C deg |
| 1770127091 | 937.7 hPa | 26.2 C deg | 36.9 % | 182 - | 0 C deg |
| 1770123484 | 936.9 hPa | 29.4 C deg | 33.5 % | 165 - | 0 C deg |
| 1770121678 | 936.2 hPa | 27.1 C deg | 36.4 % | 166 - | 0 C deg |
| 1770117993 | 936.5 hPa | 31.4 C deg | 29.1 % | 204 - | 0 C deg |
| 1770110722 | 936.6 hPa | 25.9 C deg | 33.8 % | 227 - | 0 C deg |
| 1770107083 | 936.7 hPa | 22.2 C deg | 38.7 % | 225 - | 0 C deg |
| 1770105293 | 936.4 hPa | 21.3 C deg | 41.3 % | 216 - | 0 C deg |
| 1770099832 | 937 hPa | 20.8 C deg | 41.7 % | 220 - | 0 C deg |
| 1770090799 | 938.5 hPa | 20.8 C deg | 40.3 % | 232 - | 0 C deg |
| 1770087147 | 938.7 hPa | 20.7 C deg | 40.5 % | 231 - | 0 C deg |
| 1770085395 | 939 hPa | 20.8 C deg | 40.6 % | 230 - | 0 C deg |
| 1770074413 | 939.3 hPa | 21.6 C deg | 41.2 % | 207 - | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
eGAS: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)