This is the latest recevied telemetry packets stored in our database for station/object PY1LBA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762344015 | 0 | 81 | 0 | 12 | 0 |
| 1762343415 | 0 | 25 | 0 | 4 | 0 |
| 1762342815 | 0 | 397 | 0 | 11 | 0 |
| 1762342215 | 0 | 28 | 0 | 3 | 0 |
| 1762341618 | 0 | 47 | 0 | 8 | 0 |
| 1762341015 | 0 | 54 | 0 | 11 | 0 |
| 1762340415 | 0 | 105 | 0 | 15 | 0 |
| 1762339815 | 0 | 711 | 0 | 15 | 0 |
| 1762339215 | 0 | 322 | 0 | 21 | 0 |
| 1762338615 | 0 | 43 | 0 | 5 | 0 |
| 1762338015 | 0 | 15 | 0 | 4 | 0 |
| 1762337415 | 0 | 45 | 0 | 7 | 0 |
| 1762336816 | 0 | 48 | 0 | 8 | 0 |
| 1762336216 | 0 | 10 | 0 | 1 | 0 |
| 1762335616 | 0 | 11 | 0 | 2 | 0 |
| 1762335016 | 0 | 46 | 0 | 3 | 0 |
| 1762334416 | 0 | 10 | 0 | 1 | 0 |
| 1762333816 | 0 | 24 | 0 | 5 | 0 |
| 1762333216 | 0 | 444 | 0 | 4 | 0 |
| 1762332616 | 0 | 837 | 0 | 6 | 0 |
| 1762332016 | 0 | 922 | 0 | 8 | 0 |
| 1762331416 | 0 | 941 | 0 | 7 | 0 |
| 1762330816 | 0 | 821 | 0 | 5 | 0 |
| 1762330216 | 0 | 19 | 0 | 4 | 0 |
| 1762329616 | 0 | 15 | 0 | 2 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)