This is the latest recevied telemetry packets stored in our database for station/object IT9LTA-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1790651699 | 0 hPa | 26.3 C deg | 48.4 % | 0 hPa | 0 C deg |
| 1790649915 | 0 hPa | 26.3 C deg | 48.7 % | 0 hPa | 0 C deg |
| 1790649869 | 0 hPa | 26.3 C deg | 48.7 % | 0 hPa | 0 C deg |
| 1790648039 | 0 hPa | 26.4 C deg | 49.1 % | 0 hPa | 0 C deg |
| 1790646209 | 0 hPa | 26.8 C deg | 48.5 % | 0 hPa | 0 C deg |
| 1790644378 | 0 hPa | 26.4 C deg | 49.8 % | 0 hPa | 0 C deg |
| 1790642548 | 0 hPa | 26.4 C deg | 50.2 % | 0 hPa | 0 C deg |
| 1790640718 | 0 hPa | 26.5 C deg | 50.2 % | 0 hPa | 0 C deg |
| 1790638888 | 0 hPa | 26.5 C deg | 49.9 % | 0 hPa | 0 C deg |
| 1790637058 | 0 hPa | 26.9 C deg | 49 % | 0 hPa | 0 C deg |
| 1790635228 | 0 hPa | 26.6 C deg | 50.1 % | 0 hPa | 0 C deg |
| 1790633398 | 0 hPa | 26.6 C deg | 50.2 % | 0 hPa | 0 C deg |
| 1790631568 | 0 hPa | 26.6 C deg | 49.9 % | 0 hPa | 0 C deg |
| 1790629738 | 0 hPa | 26.6 C deg | 50.8 % | 0 hPa | 0 C deg |
| 1790627908 | 0 hPa | 26.7 C deg | 50.8 % | 0 hPa | 0 C deg |
| 1790626078 | 0 hPa | 26.8 C deg | 50.8 % | 0 hPa | 0 C deg |
| 1790624296 | 0 hPa | 26.3 C deg | 53.5 % | 0 hPa | 0 C deg |
| 1790624248 | 0 hPa | 26.3 C deg | 53.5 % | 0 hPa | 0 C deg |
| 1790622417 | 0 hPa | 26.7 C deg | 52.3 % | 0 hPa | 0 C deg |
| 1790620587 | 0 hPa | 26.8 C deg | 52.5 % | 0 hPa | 0 C deg |
| 1790618757 | 0 hPa | 26.3 C deg | 52.4 % | 0 hPa | 0 C deg |
| 1790616927 | 0 hPa | 26.5 C deg | 50.6 % | 0 hPa | 0 C deg |
| 1790615097 | 0 hPa | 26.5 C deg | 48.4 % | 0 hPa | 0 C deg |
| 1790613267 | 0 hPa | 27.1 C deg | 45.7 % | 0 hPa | 0 C deg |
| 1790611437 | 0 hPa | 26.8 C deg | 45.6 % | 0 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)