This is the latest recevied telemetry packets stored in our database for station/object HAYDN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1750218716 | 0 | 4 | 12.5 | 0 | 12.8 |
| 1750217816 | 0 | 4 | 12.5 | 0 | 12.8 |
| 1750216916 | 0 | 4 | 12.5 | 0 | 12.8 |
| 1750216016 | 0 | 6 | 12.6 | 0 | 12.9 |
| 1750215116 | 0 | 28 | 12.7 | 0 | 12.9 |
| 1750214216 | 0 | 47 | 12.8 | 0 | 13 |
| 1750213316 | 0 | 41 | 13 | 0 | 13.3 |
| 1750212416 | 0 | 51 | 13.3 | 0 | 13.5 |
| 1750211516 | 0 | 52 | 13.5 | 0 | 13.4 |
| 1750210616 | 0 | 57 | 13.7 | 0 | 14 |
| 1750209716 | 0 | 63 | 13.7 | 0 | 14 |
| 1750208816 | 0 | 63 | 13.7 | 0 | 14 |
| 1750207916 | 0 | 64 | 13.7 | 0 | 14 |
| 1750207016 | 0 | 64 | 13.7 | 0 | 14 |
| 1750206116 | 0 | 60 | 13.7 | 0 | 14 |
| 1750205217 | 0 | 65 | 13.7 | 0 | 14 |
| 1750204316 | 0 | 65 | 13.7 | 0 | 14 |
| 1750203416 | 0 | 64 | 13.8 | 0 | 14 |
| 1750202516 | 0 | 64 | 13.7 | 0 | 14 |
| 1750201617 | 0 | 49 | 13.5 | 0 | 13.8 |
| 1750200716 | 0 | 65 | 13.7 | 0 | 14 |
| 1750199816 | 0 | 64 | 13.7 | 0 | 14 |
| 1750198016 | 0 | 62 | 13.7 | 0 | 14 |
| 1750197116 | 0 | 64 | 13.7 | 0 | 14 |
| 1750196216 | 0 | 65 | 13.7 | 0 | 14 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)