This is the latest recevied telemetry packets stored in our database for station/object EA5KAO-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1762299364 | 4.19 VDC | 23.5 C | 52.32 % | 1023.13 hPa | 0 |
| 1762297558 | 4.19 VDC | 23.7 C | 52.46 % | 1025.13 hPa | 0 |
| 1762293946 | 4.19 VDC | 24 C | 52.2 % | 1026.5 hPa | 0 |
| 1762293043 | 4.19 VDC | 24.1 C | 52.26 % | 1022.75 hPa | 0 |
| 1762292140 | 4.19 VDC | 24.2 C | 51.71 % | 1026 hPa | 0 |
| 1762291237 | 4.21 VDC | 24.3 C | 51.83 % | 1023.13 hPa | 0 |
| 1762290334 | 4.17 VDC | 24.3 C | 51.85 % | 1023.88 hPa | 0 |
| 1762284013 | 4.17 VDC | 24.8 C | 51.36 % | 1022.38 hPa | 0 |
| 1762283110 | 4.17 VDC | 24.9 C | 51.78 % | 1022 hPa | 0 |
| 1762281304 | 4.17 VDC | 24.9 C | 51.5 % | 1021.88 hPa | 0 |
| 1762279498 | 4.17 VDC | 25 C | 50.72 % | 1024.88 hPa | 0 |
| 1762277692 | 4.17 VDC | 25.1 C | 50.13 % | 1022.25 hPa | 0 |
| 1762275886 | 4.19 VDC | 25.2 C | 49.83 % | 1021.13 hPa | 0 |
| 1762274983 | 4.19 VDC | 25.3 C | 49.53 % | 1020.5 hPa | 0 |
| 1762274080 | 4.19 VDC | 25.5 C | 49.12 % | 1018.5 hPa | 0 |
| 1762273177 | 4.19 VDC | 25.7 C | 47.66 % | 1021 hPa | 0 |
| 1762272274 | 4.19 VDC | 25.9 C | 47.41 % | 1022.63 hPa | 0 |
| 1762266521 | 4.19 VDC | 29 C | 43.52 % | 1026.75 hPa | 0 |
| 1762265618 | 4.19 VDC | 29.6 C | 42.7 % | 1025.5 hPa | 0 |
| 1762264808 | 4.21 VDC | 29.7 C | 43.19 % | 1013.75 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)