APRS Track Direct

My position About ☰

reset

F4BYF-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F4BYF-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1766217022	13.8 Volt	170 Pkt	100 Pkt	79 Pcnt
1766215218	13.8 Volt	170 Pkt	90 Pkt	74 Pcnt
1766213418	13.8 Volt	160 Pkt	80 Pkt	70 Pcnt
1766211615	13.8 Volt	220 Pkt	100 Pkt	71 Pcnt
1766209813	13.8 Volt	250 Pkt	110 Pkt	73 Pcnt
1766208013	13.8 Volt	240 Pkt	100 Pkt	75 Pcnt
1766206210	13.8 Volt	260 Pkt	120 Pkt	75 Pcnt
1766204408	13.8 Volt	260 Pkt	110 Pkt	74 Pcnt
1766202607	13.8 Volt	240 Pkt	110 Pkt	74 Pcnt
1766200805	13.8 Volt	230 Pkt	110 Pkt	74 Pcnt
1766199004	13.8 Volt	250 Pkt	110 Pkt	73 Pcnt
1766197202	13.8 Volt	190 Pkt	100 Pkt	71 Pcnt
1766195399	13.8 Volt	160 Pkt	70 Pkt	64 Pcnt
1766193598	13.8 Volt	160 Pkt	70 Pkt	65 Pcnt
1766191796	13.8 Volt	150 Pkt	70 Pkt	74 Pcnt
1766189994	13.8 Volt	170 Pkt	90 Pkt	76 Pcnt
1766188193	13.8 Volt	180 Pkt	90 Pkt	76 Pcnt
1766186391	13.8 Volt	150 Pkt	70 Pkt	74 Pcnt
1766184589	13.8 Volt	150 Pkt	80 Pkt	72 Pcnt
1766182787	13.8 Volt	170 Pkt	90 Pkt	75 Pcnt
1766180986	13.8 Volt	160 Pkt	90 Pkt	81 Pcnt
1766179184	13.8 Volt	180 Pkt	90 Pkt	70 Pcnt
1766177382	13.8 Volt	180 Pkt	90 Pkt	68 Pcnt
1766175580	13.8 Volt	160 Pkt	70 Pkt	70 Pcnt
1766173779	13.8 Volt	170 Pkt	80 Pkt	71 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)