APRS Track Direct

My position About ☰

reset

VE6YMM-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE6YMM-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Vin*	RPTBAT*	Eff1h*	Dg1h*
1836274580	14 C	11.7 Volt	13.4 Volt	62 Pcnt	10 Pkt
1836274430	14 C	11.25 Volt	13.4 Volt	58 Pcnt	10 Pkt
1836274280	14 C	11.55 Volt	13.4 Volt	63 Pcnt	10 Pkt
1836274130	14 C	10.58 Volt	13.4 Volt	60 Pcnt	10 Pkt
1836273980	14 C	11.55 Volt	13.4 Volt	64 Pcnt	10 Pkt
1770156458	0.5 C	10.88 Volt	13.4 Volt	74 Pcnt	20 Pkt
1770156158	0.5 C	10.2 Volt	13.4 Volt	72 Pcnt	30 Pkt
1770155858	0.5 C	11.33 Volt	13.4 Volt	72 Pcnt	20 Pkt
1770155558	0.5 C	10.5 Volt	13.4 Volt	70 Pcnt	30 Pkt
1770155258	0.5 C	10.58 Volt	13.4 Volt	71 Pcnt	20 Pkt
1770154958	0.5 C	10.2 Volt	13.4 Volt	71 Pcnt	30 Pkt
1770154658	0.5 C	11.4 Volt	13.4 Volt	73 Pcnt	20 Pkt
1770154360	0.5 C	11.18 Volt	13.4 Volt	72 Pcnt	20 Pkt
1770154358	0.5 C	11.18 Volt	13.4 Volt	72 Pcnt	20 Pkt
1770154058	0.5 C	10.95 Volt	13.4 Volt	73 Pcnt	20 Pkt
1770153758	0 C	11.25 Volt	13.4 Volt	73 Pcnt	20 Pkt
1770153458	1 C	10.28 Volt	13.4 Volt	72 Pcnt	20 Pkt
1770153158	1 C	10.28 Volt	13.4 Volt	71 Pcnt	20 Pkt
1770152858	1 C	10.65 Volt	13.4 Volt	73 Pcnt	20 Pkt
1770152558	1 C	10.65 Volt	13.4 Volt	72 Pcnt	20 Pkt
1770152258	1 C	10.8 Volt	13.4 Volt	72 Pcnt	20 Pkt
1770151958	0.5 C	10.28 Volt	13.4 Volt	73 Pcnt	20 Pkt
1770151658	1 C	11.03 Volt	13.4 Volt	73 Pcnt	20 Pkt
1770151358	0.5 C	10.43 Volt	13.4 Volt	72 Pcnt	20 Pkt
1770151058	0 C	11.18 Volt	13.4 Volt	72 Pcnt	20 Pkt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

RPTBAT: 0, 0.1, 0

Eff1h: 0, 1, 0

Dg1h: 0, 10, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)