This is the latest recevied telemetry packets stored in our database for station/object DJ5RQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1750147168 | 22.2 deg C | 53.8 % | 1026.3 hPa | 0 | 0 |
| 1750146267 | 20.7 deg C | 57.5 % | 1026.5 hPa | 0 | 0 |
| 1750145367 | 21.5 deg C | 55.7 % | 1026.5 hPa | 0 | 0 |
| 1750144466 | 21 deg C | 58.8 % | 1026.6 hPa | 0 | 0 |
| 1750143566 | 20 deg C | 60.6 % | 1026.9 hPa | 0 | 0 |
| 1750142666 | 19.5 deg C | 62.7 % | 1026.9 hPa | 0 | 0 |
| 1750141766 | 19.1 deg C | 65.6 % | 1026.9 hPa | 0 | 0 |
| 1750140866 | 18.3 deg C | 67.2 % | 1027.1 hPa | 0 | 0 |
| 1750139966 | 17.7 deg C | 70.8 % | 1027.1 hPa | 0 | 0 |
| 1750139066 | 16.9 deg C | 73.9 % | 1027.2 hPa | 0 | 0 |
| 1750138741 | 16.5 deg C | 75.4 % | 1027.3 hPa | 0 | 0 |
| 1750137839 | 15.6 deg C | 78.2 % | 1027.4 hPa | 0 | 0 |
| 1750136939 | 14.7 deg C | 80.3 % | 1027.4 hPa | 0 | 0 |
| 1750136039 | 13.9 deg C | 82.6 % | 1027.4 hPa | 0 | 0 |
| 1750135139 | 12.9 deg C | 84.7 % | 1027.6 hPa | 0 | 0 |
| 1750134239 | 12.1 deg C | 86.7 % | 1027.7 hPa | 0 | 0 |
| 1750133339 | 11.7 deg C | 87.7 % | 1027.7 hPa | 0 | 0 |
| 1750132438 | 11.5 deg C | 87.6 % | 1027.9 hPa | 0 | 0 |
| 1750131538 | 11.5 deg C | 87.7 % | 1028 hPa | 0 | 0 |
| 1750130638 | 11.4 deg C | 88 % | 1028 hPa | 0 | 0 |
| 1750129738 | 11.5 deg C | 87.8 % | 1027.8 hPa | 0 | 0 |
| 1750128838 | 11.7 deg C | 86.9 % | 1027.8 hPa | 0 | 0 |
| 1750127938 | 11.9 deg C | 86.7 % | 1027.7 hPa | 0 | 0 |
| 1750127038 | 12 deg C | 86.3 % | 1027.6 hPa | 0 | 0 |
| 1750126702 | 12.1 deg C | 86.2 % | 1027.6 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)