This is the latest recevied telemetry packets stored in our database for station/object DK8AF-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762259717 | 21.9 deg C | 48.7 % | 0 | 0 | 0 |
| 1762258817 | 21.7 deg C | 48.5 % | 0 | 0 | 0 |
| 1762257917 | 21.6 deg C | 48.8 % | 0 | 0 | 0 |
| 1762257387 | 21.5 deg C | 49.3 % | 0 | 0 | 0 |
| 1762256487 | 21.6 deg C | 48.4 % | 0 | 0 | 0 |
| 1762256155 | 21.6 deg C | 48.8 % | 0 | 0 | 0 |
| 1762255255 | 21.6 deg C | 48.8 % | 0 | 0 | 0 |
| 1762254355 | 21.5 deg C | 48.4 % | 0 | 0 | 0 |
| 1762253455 | 21.8 deg C | 48.5 % | 0 | 0 | 0 |
| 1762252555 | 21.8 deg C | 48.4 % | 0 | 0 | 0 |
| 1762251655 | 21.8 deg C | 48.4 % | 0 | 0 | 0 |
| 1762250755 | 21.8 deg C | 48.3 % | 0 | 0 | 0 |
| 1762249855 | 21.8 deg C | 48.3 % | 0 | 0 | 0 |
| 1762248955 | 21.7 deg C | 48.4 % | 0 | 0 | 0 |
| 1762248054 | 21.7 deg C | 48.3 % | 0 | 0 | 0 |
| 1762247154 | 21.7 deg C | 48.4 % | 0 | 0 | 0 |
| 1762246254 | 21.7 deg C | 48.2 % | 0 | 0 | 0 |
| 1762245354 | 21.7 deg C | 48.2 % | 0 | 0 | 0 |
| 1762244454 | 21.7 deg C | 48.2 % | 0 | 0 | 0 |
| 1762244123 | 21.7 deg C | 48.3 % | 0 | 0 | 0 |
| 1762243223 | 21.7 deg C | 48.4 % | 0 | 0 | 0 |
| 1762242322 | 21.7 deg C | 48.4 % | 0 | 0 | 0 |
| 1762241422 | 21.7 deg C | 48.5 % | 0 | 0 | 0 |
| 1762240522 | 21.7 deg C | 48.6 % | 0 | 0 | 0 |
| 1762239622 | 21.7 deg C | 48.8 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)