This is the latest recevied telemetry packets stored in our database for station/object DJ7ACM-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732288078 | 2.3 deg C | 84 % | 0 | 0 | 0 |
| 1732287178 | 2.5 deg C | 84.2 % | 0 | 0 | 0 |
| 1732286278 | 2.7 deg C | 84 % | 0 | 0 | 0 |
| 1732285947 | 2.7 deg C | 84.4 % | 0 | 0 | 0 |
| 1732285047 | 2.6 deg C | 85 % | 0 | 0 | 0 |
| 1732284147 | 2.6 deg C | 87.3 % | 0 | 0 | 0 |
| 1732283247 | 2.9 deg C | 85.7 % | 0 | 0 | 0 |
| 1732282347 | 3.2 deg C | 81 % | 0 | 0 | 0 |
| 1732281447 | 3.4 deg C | 78.9 % | 0 | 0 | 0 |
| 1732280546 | 3.2 deg C | 79.3 % | 0 | 0 | 0 |
| 1732279646 | 3.7 deg C | 76.6 % | 0 | 0 | 0 |
| 1732278746 | 3.7 deg C | 74.1 % | 0 | 0 | 0 |
| 1732277846 | 4.6 deg C | 70.4 % | 0 | 0 | 0 |
| 1732276946 | 6 deg C | 64.9 % | 0 | 0 | 0 |
| 1732276046 | 7.3 deg C | 60 % | 0 | 0 | 0 |
| 1732275146 | 12.7 deg C | 51.6 % | 0 | 0 | 0 |
| 1732274246 | 11.2 deg C | 50.4 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)