APRS Track Direct

My position About ☰

reset

DC1SK-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DC1SK-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1754229871	0.14 Rx Erlang	0 Tx Erlang	113 count/10m	110 count/10m	0 count/10m
1754228671	0.17 Rx Erlang	0 Tx Erlang	118 count/10m	116 count/10m	0 count/10m
1754227470	0.15 Rx Erlang	0 Tx Erlang	118 count/10m	115 count/10m	0 count/10m
1754226271	0.18 Rx Erlang	0 Tx Erlang	129 count/10m	125 count/10m	0 count/10m
1754225071	0.12 Rx Erlang	0 Tx Erlang	87 count/10m	83 count/10m	0 count/10m
1754223871	0.2 Rx Erlang	0 Tx Erlang	134 count/10m	131 count/10m	0 count/10m
1754222671	0.19 Rx Erlang	0 Tx Erlang	144 count/10m	139 count/10m	0 count/10m
1754221471	0.16 Rx Erlang	0 Tx Erlang	116 count/10m	113 count/10m	0 count/10m
1754220271	0.11 Rx Erlang	0 Tx Erlang	74 count/10m	71 count/10m	0 count/10m
1754219070	0.13 Rx Erlang	0 Tx Erlang	94 count/10m	89 count/10m	0 count/10m
1754217871	0.1 Rx Erlang	0 Tx Erlang	72 count/10m	69 count/10m	0 count/10m
1754216671	0.1 Rx Erlang	0 Tx Erlang	83 count/10m	80 count/10m	0 count/10m
1754215471	0.12 Rx Erlang	0 Tx Erlang	101 count/10m	97 count/10m	0 count/10m
1754214271	0.12 Rx Erlang	0 Tx Erlang	86 count/10m	83 count/10m	0 count/10m
1754213071	0.11 Rx Erlang	0 Tx Erlang	82 count/10m	79 count/10m	0 count/10m
1754211871	0.15 Rx Erlang	0 Tx Erlang	112 count/10m	108 count/10m	0 count/10m
1754210671	0.12 Rx Erlang	0 Tx Erlang	87 count/10m	83 count/10m	0 count/10m
1754209471	0.13 Rx Erlang	0 Tx Erlang	83 count/10m	79 count/10m	0 count/10m
1754208271	0.12 Rx Erlang	0 Tx Erlang	86 count/10m	82 count/10m	0 count/10m
1754207071	0.15 Rx Erlang	0 Tx Erlang	118 count/10m	114 count/10m	0 count/10m
1754205870	0.18 Rx Erlang	0 Tx Erlang	151 count/10m	148 count/10m	0 count/10m
1754204671	0.18 Rx Erlang	0 Tx Erlang	130 count/10m	127 count/10m	0 count/10m
1754203471	0.16 Rx Erlang	0 Tx Erlang	103 count/10m	100 count/10m	0 count/10m
1754202271	0.16 Rx Erlang	0 Tx Erlang	104 count/10m	101 count/10m	0 count/10m
1754201070	0.13 Rx Erlang	0 Tx Erlang	102 count/10m	98 count/10m	0 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)