This is the latest recevied telemetry packets stored in our database for station/object IZ1RFL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1790657432 | 0 Count | 728 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1790656532 | 0 Count | 714 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1790654732 | 0 Count | 698 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1790653830 | 0 Count | 686 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1790652930 | 0 Count | 676 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1790652030 | 0 Count | 672 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1790651130 | 0 Count | 662 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1790650230 | 0 Count | 645 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1790649330 | 0 Count | 629 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1790648430 | 0 Count | 615 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1790647530 | 0 Count | 598 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1790646630 | 0 Count | 592 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1790645729 | 0 Count | 578 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1790644829 | 0 Count | 558 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1790643929 | 0 Count | 548 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1790643029 | 0 Count | 542 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1790642129 | 0 Count | 531 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1790640329 | 0 Count | 513 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1790639429 | 0 Count | 507 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1790638528 | 0 Count | 494 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1790637628 | 0 Count | 484 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1790636728 | 0 Count | 470 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1790635828 | 0 Count | 459 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1790634928 | 0 Count | 454 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1790634028 | 0 Count | 450 Count | 0 Count | 4.23 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)