APRS Track Direct

My position About ☰

reset

IK8WTD-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IK8WTD-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Vsolar*	Dg1h*	Eff1h*	Temp*
1750165985	13.3 Volt	19.2 Volt	30 Pkt	59 Pcnt	36.5 C
1750165084	13.3 Volt	19.3 Volt	30 Pkt	58 Pcnt	37 C
1750164183	13.3 Volt	19.4 Volt	30 Pkt	60 Pcnt	36.5 C
1750163282	13.3 Volt	19.5 Volt	40 Pkt	68 Pcnt	36 C
1750162382	13.4 Volt	19.6 Volt	50 Pkt	71 Pcnt	35 C
1750161481	13.3 Volt	19.6 Volt	50 Pkt	71 Pcnt	36 C
1750160580	13.4 Volt	19.5 Volt	40 Pkt	56 Pcnt	36 C
1750159679	13.4 Volt	19.7 Volt	50 Pkt	56 Pcnt	35 C
1750158778	13.4 Volt	19.7 Volt	50 Pkt	55 Pcnt	35 C
1750157877	13.4 Volt	19.9 Volt	60 Pkt	57 Pcnt	34.5 C
1750156976	13.4 Volt	19.8 Volt	60 Pkt	69 Pcnt	34 C
1750156075	13.4 Volt	19.8 Volt	50 Pkt	68 Pcnt	34 C
1750155175	13.4 Volt	19.7 Volt	30 Pkt	63 Pcnt	34 C
1750154274	13.4 Volt	19.6 Volt	30 Pkt	66 Pcnt	33.5 C
1750153373	13.4 Volt	19.6 Volt	30 Pkt	62 Pcnt	33.5 C
1750152472	13.4 Volt	19.6 Volt	20 Pkt	62 Pcnt	34 C
1750151571	13.4 Volt	19.5 Volt	30 Pkt	61 Pcnt	34.5 C
1750150670	13.4 Volt	19.5 Volt	30 Pkt	58 Pcnt	35 C
1750149772	13.4 Volt	19.4 Volt	30 Pkt	60 Pcnt	35.5 C
1750148869	13.4 Volt	19.3 Volt	50 Pkt	63 Pcnt	35 C
1750147968	13.4 Volt	19.2 Volt	60 Pkt	65 Pcnt	34 C
1750147067	13.5 Volt	18.9 Volt	60 Pkt	69 Pcnt	34 C
1750146166	13.5 Volt	18.9 Volt	80 Pkt	69 Pcnt	33.5 C
1750145265	13.5 Volt	18.8 Volt	80 Pkt	71 Pcnt	34 C
1750144364	13.5 Volt	18.3 Volt	80 Pkt	75 Pcnt	34 C

*Used Equation Coefficients:

Vin: 0, 0.1, 0

Vsolar: 0, 0.1, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)