APRS Track Direct

My position About ☰

reset

W6UA-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W6UA-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Temp*
1762279847	13.05 Volt	30 Pkt	21 Pcnt	18 C
1762279846	13.05 Volt	30 Pkt	21 Pcnt	18 C
1762278047	13.05 Volt	20 Pkt	21 Pcnt	17.5 C
1762278046	13.05 Volt	20 Pkt	21 Pcnt	17.5 C
1762276247	13.05 Volt	20 Pkt	21 Pcnt	16.5 C
1762276247	13.05 Volt	20 Pkt	21 Pcnt	16.5 C
1762275347	13.05 Volt	30 Pkt	21 Pcnt	16.5 C
1762274447	13.05 Volt	30 Pkt	21 Pcnt	16 C
1762274447	13.05 Volt	30 Pkt	21 Pcnt	16 C
1762273547	13.05 Volt	20 Pkt	21 Pcnt	15.5 C
1762272647	13.05 Volt	10 Pkt	21 Pcnt	15.5 C
1762272647	13.05 Volt	10 Pkt	21 Pcnt	15.5 C
1762271747	13.05 Volt	10 Pkt	21 Pcnt	15 C
1762270848	13.05 Volt	10 Pkt	21 Pcnt	15 C
1762270847	13.05 Volt	10 Pkt	21 Pcnt	15 C
1762269947	13.05 Volt	10 Pkt	21 Pcnt	15 C
1762269048	13.05 Volt	20 Pkt	21 Pcnt	15 C
1762269047	13.05 Volt	20 Pkt	21 Pcnt	15 C
1762268148	13.05 Volt	20 Pkt	21 Pcnt	15 C
1762267247	13.05 Volt	20 Pkt	21 Pcnt	15 C
1762267247	13.05 Volt	20 Pkt	21 Pcnt	15 C
1762266348	13.05 Volt	20 Pkt	21 Pcnt	15.5 C
1762265448	13.05 Volt	20 Pkt	21 Pcnt	15.5 C
1762265447	13.05 Volt	20 Pkt	21 Pcnt	15.5 C
1762263648	13.05 Volt	10 Pkt	21 Pcnt	15.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)