APRS Track Direct

My position About ☰

reset

YM2VTC Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM2VTC. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1786730846	49 Pkt	11 Pkt	0 Pkt	-89 dBm	0.14 V
1786730116	49 Pkt	20 Pkt	4 Pkt	-88 dBm	0.14 V
1786729386	53 Pkt	14 Pkt	1 Pkt	-88 dBm	0.14 V
1786728656	56 Pkt	15 Pkt	1 Pkt	-86 dBm	0.14 V
1786727926	70 Pkt	12 Pkt	1 Pkt	-87 dBm	0.14 V
1786727196	65 Pkt	15 Pkt	0 Pkt	-88 dBm	0.14 V
1786726466	62 Pkt	11 Pkt	0 Pkt	-88 dBm	0.14 V
1786725736	53 Pkt	16 Pkt	0 Pkt	-88 dBm	0.14 V
1786725006	72 Pkt	10 Pkt	0 Pkt	-88 dBm	0.14 V
1786724276	69 Pkt	13 Pkt	0 Pkt	-86 dBm	0.14 V
1786723546	63 Pkt	16 Pkt	3 Pkt	-88 dBm	0.14 V
1786722816	54 Pkt	13 Pkt	1 Pkt	-88 dBm	0.14 V
1786722086	54 Pkt	9 Pkt	1 Pkt	-88 dBm	0.14 V
1786721356	56 Pkt	14 Pkt	0 Pkt	-86 dBm	0.14 V
1786720626	57 Pkt	11 Pkt	1 Pkt	-88 dBm	0.14 V
1786719896	52 Pkt	13 Pkt	3 Pkt	-89 dBm	0.14 V
1786719166	40 Pkt	14 Pkt	1 Pkt	-87 dBm	0.14 V
1786718436	46 Pkt	11 Pkt	1 Pkt	-87 dBm	0.14 V
1786717707	49 Pkt	7 Pkt	1 Pkt	-87 dBm	0.14 V
1786716978	5 Pkt	0 Pkt	0 Pkt	-88 dBm	0.14 V
1786716299	38 Pkt	11 Pkt	1 Pkt	-88 dBm	0.14 V
1786715569	50 Pkt	18 Pkt	0 Pkt	-86 dBm	0.14 V
1786714839	45 Pkt	10 Pkt	3 Pkt	-86 dBm	0.14 V
1786714109	58 Pkt	14 Pkt	2 Pkt	-89 dBm	0.14 V
1786713379	60 Pkt	13 Pkt	2 Pkt	-87 dBm	0.14 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)