This is the latest recevied telemetry packets stored in our database for station/object VK4ARD-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790661304 | 130 | 47 | 0 | 0 | 0 |
| 1790660584 | 128 | 45 | 0 | 0 | 0 |
| 1790657703 | 128 | 46 | 0 | 0 | 0 |
| 1790656984 | 135 | 47 | 0 | 0 | 0 |
| 1790656264 | 133 | 47 | 0 | 0 | 0 |
| 1790654102 | 128 | 46 | 0 | 0 | 0 |
| 1790653381 | 128 | 47 | 0 | 0 | 0 |
| 1790652661 | 140 | 46 | 0 | 0 | 0 |
| 1790651942 | 134 | 47 | 0 | 0 | 0 |
| 1790651220 | 134 | 46 | 0 | 0 | 0 |
| 1790650501 | 131 | 47 | 0 | 0 | 0 |
| 1790649781 | 142 | 47 | 0 | 0 | 0 |
| 1790649059 | 128 | 47 | 0 | 0 | 0 |
| 1790646897 | 130 | 46 | 0 | 0 | 0 |
| 1790644736 | 132 | 47 | 0 | 0 | 0 |
| 1790643298 | 132 | 47 | 0 | 0 | 0 |
| 1790641855 | 136 | 47 | 0 | 0 | 0 |
| 1790641135 | 142 | 46 | 0 | 0 | 0 |
| 1790638974 | 132 | 47 | 0 | 0 | 0 |
| 1790638254 | 129 | 47 | 0 | 0 | 0 |
| 1790636813 | 137 | 47 | 0 | 0 | 0 |
| 1790636093 | 132 | 47 | 0 | 0 | 0 |
| 1790634652 | 128 | 47 | 0 | 0 | 0 |
| 1790631772 | 128 | 47 | 0 | 0 | 0 |
| 1790628890 | 126 | 46 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)