This is the latest recevied telemetry packets stored in our database for station/object DG0JDE-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274701 | 12.6 deg C | 92.9 % | 1023 hPa | 0 | 0 |
| 1762308926 | 6.4 deg C | 89.6 % | 1025.4 hPa | 0 | 0 |
| 1762308025 | 6.2 deg C | 90 % | 1025.3 hPa | 0 | 0 |
| 1762307125 | 6.2 deg C | 89.8 % | 1025.3 hPa | 0 | 0 |
| 1762306225 | 6.3 deg C | 89.7 % | 1025.3 hPa | 0 | 0 |
| 1762305325 | 6.4 deg C | 89.8 % | 1025.4 hPa | 0 | 0 |
| 1762304425 | 6.4 deg C | 90.2 % | 1025.5 hPa | 0 | 0 |
| 1762303717 | 6.4 deg C | 90.2 % | 1025.4 hPa | 0 | 0 |
| 1762302817 | 6.5 deg C | 90.2 % | 1025.2 hPa | 0 | 0 |
| 1762301917 | 6.6 deg C | 89.8 % | 1025.2 hPa | 0 | 0 |
| 1762301017 | 6.7 deg C | 89.5 % | 1025.3 hPa | 0 | 0 |
| 1762300691 | 6.8 deg C | 89.4 % | 1025.3 hPa | 0 | 0 |
| 1762299791 | 7 deg C | 88.6 % | 1025.3 hPa | 0 | 0 |
| 1762298891 | 7.5 deg C | 88.4 % | 1025.3 hPa | 0 | 0 |
| 1762297991 | 7.6 deg C | 88.5 % | 1025.2 hPa | 0 | 0 |
| 1762297102 | 7.8 deg C | 88.2 % | 1025.1 hPa | 0 | 0 |
| 1762296346 | 8 deg C | 87.8 % | 1025 hPa | 0 | 0 |
| 1762295444 | 8.3 deg C | 87.6 % | 1024.9 hPa | 0 | 0 |
| 1762294544 | 8.7 deg C | 86.9 % | 1024.9 hPa | 0 | 0 |
| 1762293644 | 8.8 deg C | 87.4 % | 1024.9 hPa | 0 | 0 |
| 1762293260 | 8.8 deg C | 87.4 % | 1024.9 hPa | 0 | 0 |
| 1762292360 | 8.9 deg C | 87.5 % | 1025.1 hPa | 0 | 0 |
| 1762291461 | 9 deg C | 87.3 % | 1025.2 hPa | 0 | 0 |
| 1762290559 | 9.2 deg C | 86.9 % | 1025.3 hPa | 0 | 0 |
| 1762290421 | 9.3 deg C | 86.5 % | 1025.3 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)