This is the latest recevied telemetry packets stored in our database for station/object DH9ZIG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp* | Humi* | Baro* | Value4* | Value5* |
---|---|---|---|---|---|
1719725505 | 24.1 deg C | 62.7 % | 1008.5 hPa | 0 | 0 |
1719724605 | 23.8 deg C | 62.7 % | 1008.4 hPa | 0 | 0 |
1719723705 | 23.8 deg C | 61.9 % | 1008.1 hPa | 0 | 0 |
1719722805 | 23.4 deg C | 62 % | 1008.1 hPa | 0 | 0 |
1719721905 | 22.8 deg C | 62.7 % | 1008.1 hPa | 0 | 0 |
1719721005 | 22.5 deg C | 62.8 % | 1007.8 hPa | 0 | 0 |
1719720105 | 22.6 deg C | 62.4 % | 1007.8 hPa | 0 | 0 |
1719719204 | 22.7 deg C | 62 % | 1007.6 hPa | 0 | 0 |
1719718304 | 22.7 deg C | 61.6 % | 1007.2 hPa | 0 | 0 |
1719717404 | 22.9 deg C | 60.7 % | 1007.1 hPa | 0 | 0 |
1719716504 | 23.3 deg C | 59 % | 1006.8 hPa | 0 | 0 |
1719715604 | 23.5 deg C | 58 % | 1006.5 hPa | 0 | 0 |
1719713710 | 24.1 deg C | 56.4 % | 1006.1 hPa | 0 | 0 |
1719712810 | 24.1 deg C | 57.2 % | 1005.9 hPa | 0 | 0 |
1719711910 | 24 deg C | 57.1 % | 1005.8 hPa | 0 | 0 |
1719711010 | 24 deg C | 57.6 % | 1005.5 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)