APRS Track Direct

My position About ☰

reset

YH0DVA-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YH0DVA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1758237553	23 Pkt	0 Pkt	31 dBm	13.58 V
1758237229	17 Pkt	0 Pkt	31 dBm	13.58 V
1758236906	18 Pkt	0 Pkt	31 dBm	13.58 V
1758236582	12 Pkt	1 Pkt	31 dBm	13.58 V
1758236259	12 Pkt	0 Pkt	31 dBm	13.58 V
1758235937	16 Pkt	0 Pkt	31 dBm	13.6 V
1758235614	16 Pkt	0 Pkt	31 dBm	13.58 V
1758235291	20 Pkt	0 Pkt	31 dBm	13.58 V
1758234968	15 Pkt	0 Pkt	31 dBm	13.58 V
1758234645	22 Pkt	0 Pkt	31 dBm	13.58 V
1758234321	24 Pkt	0 Pkt	31 dBm	13.58 V
1758233997	21 Pkt	1 Pkt	31 dBm	13.58 V
1758233672	13 Pkt	0 Pkt	31 dBm	13.6 V
1758233349	22 Pkt	0 Pkt	31 dBm	13.58 V
1758233025	18 Pkt	1 Pkt	31 dBm	13.56 V
1758232700	16 Pkt	0 Pkt	31 dBm	13.58 V
1758232376	23 Pkt	0 Pkt	31 dBm	13.56 V
1758232053	16 Pkt	0 Pkt	31 dBm	13.58 V
1758231730	21 Pkt	0 Pkt	31 dBm	13.56 V
1758231406	20 Pkt	1 Pkt	31 dBm	13.58 V
1758231082	16 Pkt	0 Pkt	31 dBm	13.62 V
1758230759	11 Pkt	0 Pkt	31 dBm	13.58 V
1758230436	15 Pkt	0 Pkt	31 dBm	13.58 V
1758230113	15 Pkt	0 Pkt	31 dBm	13.6 V
1758229789	22 Pkt	0 Pkt	31 dBm	13.64 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)