This is the latest recevied telemetry packets stored in our database for station/object OK9MAD-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | CPU.Temp* | Env.Temp* | Env.Hum* | Value4* | Value5* |
---|---|---|---|---|---|
1719855333 | 36.5 Deg.C | 15.8 Deg.C | 28.8 Perc | 0 | 0 |
1719855024 | 37 Deg.C | 15.9 Deg.C | 28.7 Perc | 0 | 0 |
1719854723 | 36.5 Deg.C | 16 Deg.C | 28.5 Perc | 0 | 0 |
1719854423 | 36.5 Deg.C | 16.2 Deg.C | 28.4 Perc | 0 | 0 |
1719854123 | 37 Deg.C | 16.4 Deg.C | 28.6 Perc | 0 | 0 |
1719853824 | 37.6 Deg.C | 16.4 Deg.C | 28.6 Perc | 0 | 0 |
1719853524 | 37.6 Deg.C | 16.5 Deg.C | 28.5 Perc | 0 | 0 |
1719853224 | 37.6 Deg.C | 16.6 Deg.C | 28.5 Perc | 0 | 0 |
1719853169 | 37.6 Deg.C | 16.7 Deg.C | 28.4 Perc | 0 | 0 |
1719852623 | 38.1 Deg.C | 16.9 Deg.C | 28.4 Perc | 0 | 0 |
1719852336 | 37.6 Deg.C | 17 Deg.C | 28.5 Perc | 0 | 0 |
1719852052 | 38.1 Deg.C | 17 Deg.C | 28.5 Perc | 0 | 0 |
1719851723 | 37.6 Deg.C | 17.1 Deg.C | 28.5 Perc | 0 | 0 |
1719851438 | 38.1 Deg.C | 17.2 Deg.C | 28.5 Perc | 0 | 0 |
1719851239 | 38.1 Deg.C | 17.4 Deg.C | 28.5 Perc | 0 | 0 |
1719850823 | 38.6 Deg.C | 17.5 Deg.C | 28.5 Perc | 0 | 0 |
1719850546 | 38.6 Deg.C | 17.6 Deg.C | 28.5 Perc | 0 | 0 |
1719850226 | 38.6 Deg.C | 17.7 Deg.C | 28.5 Perc | 0 | 0 |
1719849922 | 38.6 Deg.C | 17.8 Deg.C | 28.5 Perc | 0 | 0 |
1719849623 | 39.2 Deg.C | 18 Deg.C | 28.5 Perc | 0 | 0 |
1719849323 | 39.2 Deg.C | 18.3 Deg.C | 28.6 Perc | 0 | 0 |
1719849023 | 39.2 Deg.C | 18.8 Deg.C | 28.9 Perc | 0 | 0 |
1719848723 | 39.7 Deg.C | 19.2 Deg.C | 29.8 Perc | 0 | 0 |
1719848422 | 39.7 Deg.C | 19.1 Deg.C | 29.6 Perc | 0 | 0 |
1719848122 | 40.8 Deg.C | 19.2 Deg.C | 29.7 Perc | 0 | 0 |
*Used Equation Coefficients:
CPU.Temp: 0, 1, 0
Env.Temp: 0, 1, 0
Env.Hum: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)