APRS Track Direct

My position About ☰

reset

E27ASY-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E27ASY-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1790652676	58 Pkt	0 Pkt	8 Pkt	-49 dBm	15.77 V
1790651746	42 Pkt	0 Pkt	7 Pkt	-48 dBm	15.91 V
1790650817	38 Pkt	2 Pkt	2 Pkt	-49 dBm	15.91 V
1790649887	26 Pkt	3 Pkt	4 Pkt	-49 dBm	15.87 V
1790649075	-	-	-	-	-
1790648960	37 Pkt	2 Pkt	2 Pkt	-49 dBm	15.79 V
1790648030	35 Pkt	1 Pkt	3 Pkt	-49 dBm	15.69 V
1790647101	44 Pkt	1 Pkt	2 Pkt	-50 dBm	15.91 V
1790646171	40 Pkt	0 Pkt	2 Pkt	-49 dBm	15.91 V
1790645242	63 Pkt	2 Pkt	5 Pkt	-47 dBm	15.71 V
1790644308	64 Pkt	2 Pkt	4 Pkt	-47 dBm	15.87 V
1790643387	-	-	-	-	-
1790643379	46 Pkt	6 Pkt	2 Pkt	-49 dBm	15.91 V
1790642448	35 Pkt	2 Pkt	3 Pkt	-48 dBm	15.75 V
1790641521	64 Pkt	3 Pkt	5 Pkt	-48 dBm	15.87 V
1790640587	51 Pkt	5 Pkt	8 Pkt	-48 dBm	15.69 V
1790639657	52 Pkt	3 Pkt	5 Pkt	-49 dBm	15.77 V
1790638727	46 Pkt	2 Pkt	5 Pkt	-50 dBm	15.87 V
1790637798	50 Pkt	6 Pkt	5 Pkt	-50 dBm	15.87 V
1790636867	38 Pkt	1 Pkt	3 Pkt	-51 dBm	15.93 V
1790635938	31 Pkt	0 Pkt	1 Pkt	-49 dBm	15.87 V
1790635010	35 Pkt	2 Pkt	0 Pkt	-50 dBm	15.87 V
1790634082	29 Pkt	0 Pkt	0 Pkt	-48 dBm	15.93 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)