This is the latest recevied telemetry packets stored in our database for station/object OE6XDG-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Volt* | Ampere* | Batt* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274057 | 12.7 V | 0 A | 0 V | 0 | 0 |
| 1762327021 | 12.5 V | 0 A | 0 V | 0 | 0 |
| 1762325206 | 12.5 V | 0 A | 0 V | 0 | 0 |
| 1762323387 | 12.4 V | 0 A | 0 V | 0 | 0 |
| 1762321569 | 12.4 V | 0 A | 0 V | 0 | 0 |
| 1762319753 | 12.4 V | 0 A | 0 V | 0 | 0 |
| 1762317935 | 12.3 V | 0 A | 0 V | 0 | 0 |
| 1762316117 | 12.4 V | 0 A | 0 V | 0 | 0 |
| 1762314301 | 12.4 V | 0 A | 0 V | 0 | 0 |
| 1762312485 | 12.4 V | 0 A | 0 V | 0 | 0 |
| 1762310670 | 12.4 V | 0 A | 0 V | 0 | 0 |
| 1762308855 | 12.5 V | 0 A | 0 V | 0 | 0 |
| 1762307040 | 12.5 V | 0 A | 0 V | 0 | 0 |
| 1762305222 | 12.5 V | 0 A | 0 V | 0 | 0 |
| 1762303407 | 12.5 V | 0 A | 0 V | 0 | 0 |
| 1762301592 | 12.5 V | 0 A | 0 V | 0 | 0 |
| 1762299777 | 12.5 V | 0 A | 0 V | 0 | 0 |
| 1762297962 | 12.5 V | 0 A | 0 V | 0 | 0 |
| 1762296147 | 12.5 V | 0 A | 0 V | 0 | 0 |
| 1762294332 | 12.5 V | 0 A | 0 V | 0 | 0 |
| 1762292520 | 12.5 V | 0 A | 0 V | 0 | 0 |
| 1762290708 | 12.5 V | 0 A | 0 V | 0 | 0 |
| 1762288896 | 12.5 V | 0 A | 0 V | 0 | 0 |
| 1762287081 | 12.6 V | 0 A | 0 V | 0 | 0 |
| 1762285266 | 12.5 V | 0 A | 0 V | 0 | 0 |
*Used Equation Coefficients:
Volt: 0, 1, 0
Ampere: 0, 1, 0
Batt: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)