This is the latest recevied telemetry packets stored in our database for station/object PI1ZTM-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762280391 | 0 Count | 163 Count | 0 Count | 0 VDC | 0 VDC |
| 1762280091 | 0 Count | 162 Count | 0 Count | 0 VDC | 0 VDC |
| 1762279791 | 0 Count | 161 Count | 0 Count | 0 VDC | 0 VDC |
| 1762279491 | 0 Count | 158 Count | 0 Count | 0 VDC | 0 VDC |
| 1762279190 | 0 Count | 158 Count | 0 Count | 0 VDC | 0 VDC |
| 1762278890 | 0 Count | 157 Count | 0 Count | 0 VDC | 0 VDC |
| 1762278590 | 0 Count | 157 Count | 0 Count | 0 VDC | 0 VDC |
| 1762278290 | 0 Count | 154 Count | 0 Count | 0 VDC | 0 VDC |
| 1762277990 | 0 Count | 153 Count | 0 Count | 0 VDC | 0 VDC |
| 1762277690 | 0 Count | 150 Count | 0 Count | 0 VDC | 0 VDC |
| 1762277390 | 0 Count | 149 Count | 0 Count | 0 VDC | 0 VDC |
| 1762277090 | 0 Count | 147 Count | 0 Count | 0 VDC | 0 VDC |
| 1762276790 | 0 Count | 146 Count | 0 Count | 0 VDC | 0 VDC |
| 1762276489 | 0 Count | 145 Count | 0 Count | 0 VDC | 0 VDC |
| 1762276189 | 0 Count | 145 Count | 0 Count | 0 VDC | 0 VDC |
| 1762275889 | 0 Count | 140 Count | 0 Count | 0 VDC | 0 VDC |
| 1762275589 | 0 Count | 138 Count | 0 Count | 0 VDC | 0 VDC |
| 1762275289 | 0 Count | 138 Count | 0 Count | 0 VDC | 0 VDC |
| 1762274989 | 0 Count | 135 Count | 0 Count | 0 VDC | 0 VDC |
| 1762274689 | 0 Count | 133 Count | 0 Count | 0 VDC | 0 VDC |
| 1762274389 | 0 Count | 132 Count | 0 Count | 0 VDC | 0 VDC |
| 1762274089 | 0 Count | 130 Count | 0 Count | 0 VDC | 0 VDC |
| 1762273789 | 0 Count | 129 Count | 0 Count | 0 VDC | 0 VDC |
| 1762273488 | 0 Count | 127 Count | 0 Count | 0 VDC | 0 VDC |
| 1762273188 | 0 Count | 125 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)