This is the latest recevied telemetry packets stored in our database for station/object EA4GLO-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkts* | Heard* | RSSI* | SNR* | Vbat* |
|---|---|---|---|---|---|
| 1792144720 | 15 Pkt | 12 Stn | -114 dBm | -20 dB | 4.9 V |
| 1792143820 | 22 Pkt | 10 Stn | -98 dBm | -0.6 dB | 4.9 V |
| 1792142920 | 21 Pkt | 15 Stn | -118 dBm | -19.4 dB | 4.9 V |
| 1792142020 | 32 Pkt | 14 Stn | -119 dBm | -20 dB | 4.9 V |
| 1792141120 | 23 Pkt | 13 Stn | -117 dBm | -18.6 dB | 4.9 V |
| 1792140220 | 24 Pkt | 11 Stn | -116 dBm | -16.6 dB | 4.7 V |
| 1792139320 | 15 Pkt | 9 Stn | -111 dBm | -17.8 dB | 4.9 V |
| 1792138420 | 23 Pkt | 10 Stn | -119 dBm | -20 dB | 4.9 V |
| 1792137520 | 22 Pkt | 8 Stn | -118 dBm | -20 dB | 4.9 V |
| 1792136620 | 16 Pkt | 12 Stn | -113 dBm | -17.4 dB | 4.9 V |
| 1792135720 | 17 Pkt | 17 Stn | -119 dBm | -20 dB | 4.9 V |
| 1792134820 | 25 Pkt | 15 Stn | -105 dBm | -9.4 dB | 4.9 V |
| 1792133920 | 30 Pkt | 13 Stn | -119 dBm | -20 dB | 4.9 V |
| 1792133020 | 17 Pkt | 11 Stn | -107 dBm | -8.8 dB | 4.7 V |
| 1792132120 | 22 Pkt | 15 Stn | -118 dBm | -20 dB | 4.9 V |
*Used Equation Coefficients:
RxPkts: 0, 1, 0
Heard: 0, 1, 0
RSSI: 0, 1, -150
SNR: 0, 0.2, -20
Vbat: 0, 0.1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)