This is the latest recevied telemetry packets stored in our database for station/object EA4CZ. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1744132500 | 12.54 | 22.5 | 37 | 746 | 0 |
| 1744131600 | 12.56 | 23 | 37 | 740 | 0 |
| 1744130700 | 12.58 | 22.7 | 36 | 739 | 0 |
| 1744129800 | 12.65 | 22.8 | 35 | 750 | 0 |
| 1744128900 | 13.2 | 22.7 | 33 | 758 | 0 |
| 1744128000 | 13.85 | 23.1 | 35 | 744 | 0 |
| 1744127100 | 13.84 | 22.8 | 32 | 753 | 0 |
| 1744126200 | 13.79 | 23.1 | 34 | 752 | 0 |
| 1744125300 | 13.83 | 22.8 | 35 | 749 | 0 |
| 1744124400 | 13.83 | 22.4 | 36 | 760 | 0 |
| 1744123500 | 13.84 | 22.3 | 38 | 769 | 0 |
| 1744122600 | 13.82 | 22.5 | 37 | 757 | 0 |
| 1744121700 | 13.84 | 22.6 | 37 | 767 | 0 |
| 1744120800 | 13.82 | 22.3 | 40 | 795 | 0 |
| 1744119900 | 14.43 | 21.9 | 40 | 791 | 0 |
| 1744119000 | 14.37 | 21.5 | 40 | 804 | 0 |
| 1744118100 | 14.41 | 22.1 | 39 | 807 | 0 |
| 1744117200 | 14.4 | 21.5 | 39 | 799 | 0 |
| 1744116300 | 14.43 | 21.6 | 40 | 812 | 0 |
| 1744115400 | 14.41 | 21.3 | 44 | 808 | 0 |
| 1744114500 | 14.44 | 20.5 | 46 | 829 | 0 |
| 1744112700 | 14.43 | 20.3 | 46 | 815 | 0 |
| 1744111800 | 14.46 | 20.1 | 51 | 814 | 0 |
| 1744110900 | 14.46 | 19.9 | 49 | 836 | 0 |
| 1744110000 | 14.42 | 19.8 | 50 | 826 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)