This is the latest recevied telemetry packets stored in our database for station/object SQ8BS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1836274697 | 37 Count | 912 Count | 0 Count | 4.46 VDC | 0 VDC |
| 1836274547 | 37 Count | 923 Count | 0 Count | 4.56 VDC | 0 VDC |
| 1836274397 | 37 Count | 905 Count | 0 Count | 4.4 VDC | 0 VDC |
| 1836274247 | 37 Count | 919 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1836274096 | 37 Count | 898 Count | 0 Count | 4.37 VDC | 0 VDC |
| 1782489834 | 0 Count | 969 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1782489533 | 0 Count | 969 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1782489233 | 0 Count | 968 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1782488933 | 0 Count | 968 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1782488633 | 0 Count | 968 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1782488333 | 0 Count | 967 Count | 0 Count | 4.49 VDC | 0 VDC |
| 1782488033 | 0 Count | 967 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1782487733 | 0 Count | 967 Count | 0 Count | 4.49 VDC | 0 VDC |
| 1782487433 | 0 Count | 967 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1782487133 | 0 Count | 966 Count | 0 Count | 4.49 VDC | 0 VDC |
| 1782486833 | 0 Count | 966 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1782486533 | 0 Count | 966 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1782486233 | 0 Count | 966 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1782485932 | 0 Count | 966 Count | 0 Count | 4.49 VDC | 0 VDC |
| 1782485642 | 0 Count | 966 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1782485339 | 0 Count | 966 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1782485039 | 0 Count | 966 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1782484739 | 0 Count | 966 Count | 0 Count | 4.49 VDC | 0 VDC |
| 1782484439 | 0 Count | 966 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1782484139 | 0 Count | 966 Count | 0 Count | 4.49 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)