This is the latest recevied telemetry packets stored in our database for station/object LU2MCA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758261648 | 360 | 113 | 509 | 405 | 0 |
| 1758261031 | 380 | 162 | 507 | 405 | 0 |
| 1758260414 | 370 | 171 | 506 | 405 | 0 |
| 1758259817 | 360 | 177 | 505 | 405 | 0 |
| 1758259205 | 380 | 184 | 504 | 405 | 0 |
| 1758258633 | 410 | 174 | 510 | 404 | 0 |
| 1758258049 | 380 | 142 | 508 | 404 | 0 |
| 1758257459 | 370 | 124 | 511 | 404 | 0 |
| 1758256860 | 380 | 120 | 510 | 404 | 0 |
| 1758256220 | 370 | 151 | 495 | 404 | 0 |
| 1758255654 | 390 | 218 | 510 | 404 | 0 |
| 1758255052 | 370 | 137 | 503 | 404 | 0 |
| 1758254442 | 380 | 108 | 500 | 404 | 0 |
| 1758253815 | 380 | 148 | 497 | 404 | 0 |
| 1758253214 | 370 | 100 | 496 | 404 | 0 |
| 1758252644 | 390 | 130 | 502 | 404 | 0 |
| 1758252029 | 380 | 98 | 496 | 404 | 0 |
| 1758251461 | 370 | 118 | 501 | 404 | 0 |
| 1758250812 | 390 | 133 | 500 | 404 | 0 |
| 1758250212 | 390 | 139 | 496 | 404 | 0 |
| 1758249640 | 410 | 115 | 500 | 404 | 0 |
| 1758249025 | 370 | 164 | 498 | 404 | 0 |
| 1758248452 | 390 | 144 | 499 | 404 | 0 |
| 1758247854 | 380 | 142 | 491 | 404 | 0 |
| 1758247241 | 390 | 224 | 516 | 404 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)