APRS Track Direct

My position About ☰

reset

VK5RAC-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK5RAC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Temp*	Battery*	TX*	Value4*	Value5*
1790659981	31.5 Deg.C	13.6 Volts	51 PTT's	5	7
1790658181	32.5 Deg.C	13.6 Volts	45 PTT's	4	37
1790656381	34 Deg.C	13.6 Volts	52 PTT's	4	7
1790654581	34.5 Deg.C	13.6 Volts	45 PTT's	3	37
1790652781	35.5 Deg.C	13.5 Volts	65 PTT's	3	7
1790650981	35 Deg.C	13.6 Volts	45 PTT's	2	37
1790649181	35 Deg.C	13.6 Volts	52 PTT's	2	7
1790647383	34 Deg.C	13.6 Volts	50 PTT's	1	37
1790645583	32.5 Deg.C	13.6 Volts	70 PTT's	1	7
1790643782	31.5 Deg.C	13.6 Volts	66 PTT's	0	37
1790641982	30.5 Deg.C	13.6 Volts	52 PTT's	0	7
1790640182	30 Deg.C	13.6 Volts	57 PTT's	23	37
1790638382	29.5 Deg.C	13.6 Volts	54 PTT's	23	7
1790636582	29 Deg.C	13.6 Volts	62 PTT's	22	37
1790634781	28 Deg.C	13.6 Volts	47 PTT's	22	7
1790632982	27.5 Deg.C	13.6 Volts	75 PTT's	21	37
1790631181	27 Deg.C	13.6 Volts	61 PTT's	21	7
1790629381	27 Deg.C	13.6 Volts	37 PTT's	20	37
1790627581	27 Deg.C	13.6 Volts	42 PTT's	20	7
1790625788	27 Deg.C	13.6 Volts	51 PTT's	19	37
1790623983	27 Deg.C	13.6 Volts	31 PTT's	19	7
1790622182	27 Deg.C	13.6 Volts	38 PTT's	18	37
1790620382	27 Deg.C	13.6 Volts	32 PTT's	18	7
1790618585	27 Deg.C	13.6 Volts	34 PTT's	17	37
1790616782	26.5 Deg.C	13.6 Volts	36 PTT's	17	7

*Used Equation Coefficients:

Temp: 0, 0.5, 0

Battery: 0, 0.1, 0

TX: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)