This is the latest recevied telemetry packets stored in our database for station/object EA5DHO-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1754208168 | 0 Count | 323 Count | 0 Count | 0 VDC | 0 VDC |
| 1754207568 | 0 Count | 301 Count | 0 Count | 0 VDC | 0 VDC |
| 1754206968 | 0 Count | 284 Count | 0 Count | 0 VDC | 0 VDC |
| 1754206368 | 0 Count | 267 Count | 0 Count | 0 VDC | 0 VDC |
| 1754205768 | 0 Count | 240 Count | 0 Count | 0 VDC | 0 VDC |
| 1754205168 | 0 Count | 227 Count | 0 Count | 0 VDC | 0 VDC |
| 1754204568 | 0 Count | 225 Count | 0 Count | 0 VDC | 0 VDC |
| 1754203968 | 0 Count | 224 Count | 0 Count | 0 VDC | 0 VDC |
| 1754203368 | 0 Count | 221 Count | 0 Count | 0 VDC | 0 VDC |
| 1754202768 | 0 Count | 215 Count | 0 Count | 0 VDC | 0 VDC |
| 1754202168 | 0 Count | 203 Count | 0 Count | 0 VDC | 0 VDC |
| 1754201568 | 0 Count | 202 Count | 0 Count | 0 VDC | 0 VDC |
| 1754200968 | 0 Count | 202 Count | 0 Count | 0 VDC | 0 VDC |
| 1754200368 | 0 Count | 202 Count | 0 Count | 0 VDC | 0 VDC |
| 1754199768 | 0 Count | 201 Count | 0 Count | 0 VDC | 0 VDC |
| 1754199168 | 0 Count | 201 Count | 0 Count | 0 VDC | 0 VDC |
| 1754198568 | 0 Count | 201 Count | 0 Count | 0 VDC | 0 VDC |
| 1754197968 | 0 Count | 200 Count | 0 Count | 0 VDC | 0 VDC |
| 1754197368 | 0 Count | 199 Count | 0 Count | 0 VDC | 0 VDC |
| 1754196767 | 0 Count | 197 Count | 0 Count | 0 VDC | 0 VDC |
| 1754196167 | 0 Count | 190 Count | 0 Count | 0 VDC | 0 VDC |
| 1754195567 | 0 Count | 175 Count | 0 Count | 0 VDC | 0 VDC |
| 1754194967 | 0 Count | 158 Count | 0 Count | 0 VDC | 0 VDC |
| 1754194367 | 0 Count | 144 Count | 0 Count | 0 VDC | 0 VDC |
| 1754193767 | 0 Count | 144 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)