APRS Track Direct

My position About ☰

reset

ON4MAX-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ON4MAX-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1732308921	13.88 Volt	1060 Pkt	400 Pkt	76 Pcnt
1732307118	13.88 Volt	1080 Pkt	410 Pkt	78 Pcnt
1732305326	13.5 Volt	1110 Pkt	440 Pkt	79 Pcnt
1732303518	13.88 Volt	1120 Pkt	440 Pkt	80 Pcnt
1732301723	13.88 Volt	1070 Pkt	430 Pkt	77 Pcnt
1732299918	13.88 Volt	1070 Pkt	430 Pkt	77 Pcnt
1732298120	13.88 Volt	1120 Pkt	420 Pkt	81 Pcnt
1732296318	13.88 Volt	1110 Pkt	430 Pkt	80 Pcnt
1732294519	13.88 Volt	1080 Pkt	420 Pkt	77 Pcnt
1732292718	13.88 Volt	1050 Pkt	400 Pkt	77 Pcnt
1732290918	13.88 Volt	1050 Pkt	420 Pkt	79 Pcnt
1732289119	13.88 Volt	1040 Pkt	420 Pkt	81 Pcnt
1732287321	13.88 Volt	1040 Pkt	420 Pkt	82 Pcnt
1732285518	13.88 Volt	1070 Pkt	420 Pkt	79 Pcnt
1732283719	13.88 Volt	1090 Pkt	420 Pkt	76 Pcnt
1732281922	13.88 Volt	1030 Pkt	370 Pkt	78 Pcnt
1732280121	13.88 Volt	1020 Pkt	330 Pkt	80 Pcnt
1732278319	13.73 Volt	1010 Pkt	340 Pkt	81 Pcnt
1732276519	13.88 Volt	880 Pkt	320 Pkt	78 Pcnt
1732274719	13.88 Volt	910 Pkt	330 Pkt	79 Pcnt
1732272920	13.5 Volt	1050 Pkt	400 Pkt	79 Pcnt
1732271119	13.88 Volt	1100 Pkt	420 Pkt	79 Pcnt
1732269323	13.88 Volt	1090 Pkt	420 Pkt	80 Pcnt
1732267519	13.88 Volt	1060 Pkt	410 Pkt	78 Pcnt
1732265721	13.88 Volt	970 Pkt	370 Pkt	76 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)