APRS Track Direct

My position About ☰

reset

W5LND-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W5LND-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1836274852	13.5 Volt	80 Pkt	30 Pkt	78 Pcnt
1836274552	13.5 Volt	80 Pkt	30 Pkt	78 Pcnt
1836274402	13.5 Volt	80 Pkt	30 Pkt	78 Pcnt
1836274252	13.5 Volt	80 Pkt	30 Pkt	79 Pcnt
1836273952	13.5 Volt	80 Pkt	30 Pkt	79 Pcnt
1762291848	13.5 Volt	70 Pkt	30 Pkt	82 Pcnt
1762291547	13.5 Volt	70 Pkt	30 Pkt	82 Pcnt
1762291247	13.5 Volt	70 Pkt	30 Pkt	82 Pcnt
1762290947	13.5 Volt	70 Pkt	30 Pkt	82 Pcnt
1762290648	13.5 Volt	70 Pkt	30 Pkt	83 Pcnt
1762290348	13.5 Volt	80 Pkt	30 Pkt	84 Pcnt
1762290047	13.5 Volt	70 Pkt	30 Pkt	82 Pcnt
1762289748	13.5 Volt	70 Pkt	30 Pkt	84 Pcnt
1762289447	13.5 Volt	70 Pkt	30 Pkt	82 Pcnt
1762289148	13.5 Volt	70 Pkt	30 Pkt	81 Pcnt
1762288848	13.5 Volt	70 Pkt	30 Pkt	81 Pcnt
1762288548	13.5 Volt	70 Pkt	30 Pkt	82 Pcnt
1762288248	13.5 Volt	70 Pkt	30 Pkt	81 Pcnt
1762287948	13.5 Volt	70 Pkt	30 Pkt	82 Pcnt
1762287648	13.5 Volt	80 Pkt	30 Pkt	83 Pcnt
1762287348	13.5 Volt	70 Pkt	30 Pkt	82 Pcnt
1762287048	13.5 Volt	80 Pkt	30 Pkt	83 Pcnt
1762286748	13.5 Volt	70 Pkt	30 Pkt	83 Pcnt
1762286448	13.5 Volt	80 Pkt	30 Pkt	82 Pcnt
1762286148	13.5 Volt	100 Pkt	40 Pkt	84 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)