This is the latest recevied telemetry packets stored in our database for station/object 2M0SBP-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1758227601 | 188 Count | 608 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1758225795 | 187 Count | 604 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1758223990 | 186 Count | 600 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1758222185 | 185 Count | 596 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1758220380 | 184 Count | 592 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1758218575 | 183 Count | 588 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1758216769 | 182 Count | 584 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1758214964 | 181 Count | 580 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1758213159 | 180 Count | 576 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1758211414 | 175 Count | 572 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1758209608 | 174 Count | 568 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1758207803 | 173 Count | 564 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1758205998 | 172 Count | 560 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1758204193 | 171 Count | 556 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1758202387 | 170 Count | 552 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1758200582 | 169 Count | 548 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1758198777 | 168 Count | 544 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1758196972 | 167 Count | 540 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1758195167 | 166 Count | 536 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1758193361 | 165 Count | 532 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1758191556 | 164 Count | 528 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1758189814 | 159 Count | 524 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1758188009 | 158 Count | 520 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1758186204 | 157 Count | 516 Count | 0 Count | 0.28 VDC | 0.14 VDC |
| 1758184399 | 156 Count | 512 Count | 0 Count | 0.28 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)