This is the latest recevied telemetry packets stored in our database for station/object CR7BQX-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1758219659 | 143 Count | 807 Count | 0 Count | 420 VDC | 7 VDC |
| 1758217856 | 142 Count | 800 Count | 0 Count | 425 VDC | 7 VDC |
| 1758216053 | 141 Count | 787 Count | 0 Count | 426 VDC | 7 VDC |
| 1758214250 | 140 Count | 780 Count | 0 Count | 423 VDC | 7 VDC |
| 1758212447 | 139 Count | 773 Count | 0 Count | 421 VDC | 7 VDC |
| 1758210678 | 134 Count | 764 Count | 0 Count | 427 VDC | 7 VDC |
| 1758208875 | 133 Count | 757 Count | 0 Count | 426 VDC | 7 VDC |
| 1758207072 | 132 Count | 750 Count | 0 Count | 419 VDC | 7 VDC |
| 1758205269 | 131 Count | 743 Count | 0 Count | 422 VDC | 7 VDC |
| 1758203466 | 130 Count | 736 Count | 0 Count | 423 VDC | 7 VDC |
| 1758201663 | 129 Count | 729 Count | 0 Count | 424 VDC | 7 VDC |
| 1758199860 | 128 Count | 722 Count | 0 Count | 425 VDC | 7 VDC |
| 1758198057 | 127 Count | 715 Count | 0 Count | 422 VDC | 7 VDC |
| 1758196254 | 126 Count | 708 Count | 0 Count | 424 VDC | 7 VDC |
| 1758194451 | 125 Count | 694 Count | 0 Count | 428 VDC | 7 VDC |
| 1758192649 | 124 Count | 687 Count | 0 Count | 421 VDC | 7 VDC |
| 1758190846 | 123 Count | 680 Count | 0 Count | 426 VDC | 7 VDC |
| 1758189076 | 118 Count | 671 Count | 0 Count | 424 VDC | 7 VDC |
| 1758187273 | 117 Count | 664 Count | 0 Count | 427 VDC | 7 VDC |
| 1758185470 | 116 Count | 657 Count | 0 Count | 426 VDC | 7 VDC |
| 1758183668 | 115 Count | 650 Count | 0 Count | 420 VDC | 7 VDC |
| 1758181865 | 114 Count | 643 Count | 0 Count | 427 VDC | 7 VDC |
| 1758180062 | 113 Count | 636 Count | 0 Count | 425 VDC | 7 VDC |
| 1758178259 | 112 Count | 630 Count | 0 Count | 428 VDC | 7 VDC |
| 1758176456 | 111 Count | 623 Count | 0 Count | 420 VDC | 7 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 1, 0
V_Ext: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)