APRS Track Direct

My position About ☰

reset

M5ADQ-0 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object M5ADQ-0. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1758268107	46 Pkts	46 Pkts	21 Pkts	35 C
1758264507	38 Pkts	38 Pkts	13 Pkts	35 C
1758260907	28 Pkts	28 Pkts	12 Pkts	35 C
1758257307	38 Pkts	38 Pkts	20 Pkts	35 C
1758253707	29 Pkts	29 Pkts	10 Pkts	35 C
1758250107	39 Pkts	39 Pkts	14 Pkts	36 C
1758246507	43 Pkts	43 Pkts	18 Pkts	36 C
1758242907	43 Pkts	43 Pkts	17 Pkts	36 C
1758239307	37 Pkts	37 Pkts	15 Pkts	36 C
1758235707	28 Pkts	28 Pkts	12 Pkts	37 C
1758232107	31 Pkts	31 Pkts	13 Pkts	37 C
1758228507	35 Pkts	35 Pkts	20 Pkts	37 C
1758224907	26 Pkts	26 Pkts	14 Pkts	38 C
1758221307	45 Pkts	45 Pkts	21 Pkts	39 C
1758217707	49 Pkts	49 Pkts	24 Pkts	39 C
1758214107	36 Pkts	36 Pkts	17 Pkts	39 C
1758210507	35 Pkts	35 Pkts	18 Pkts	39 C
1758206907	24 Pkts	24 Pkts	15 Pkts	39 C
1758203306	23 Pkts	23 Pkts	15 Pkts	39 C
1758199707	20 Pkts	20 Pkts	8 Pkts	38 C
1758196107	29 Pkts	29 Pkts	14 Pkts	37 C
1758192507	17 Pkts	17 Pkts	9 Pkts	37 C
1758188907	13 Pkts	13 Pkts	8 Pkts	36 C
1758185307	15 Pkts	15 Pkts	4 Pkts	35 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)