This is the latest recevied telemetry packets stored in our database for station/object KB1IKN-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732294070 | 146 | 164 | 28 | 0 | 0 |
| 1732290437 | 146 | 164 | 43 | 0 | 0 |
| 1732288621 | 146 | 164 | 44 | 0 | 0 |
| 1732286805 | 146 | 164 | 46 | 0 | 0 |
| 1732284988 | 146 | 163 | 43 | 0 | 0 |
| 1732283172 | 146 | 163 | 46 | 0 | 0 |
| 1732281356 | 146 | 163 | 49 | 0 | 0 |
| 1732279539 | 146 | 163 | 47 | 0 | 0 |
| 1732277723 | 146 | 164 | 53 | 0 | 0 |
| 1732275907 | 146 | 163 | 63 | 0 | 0 |
| 1732272274 | 146 | 163 | 25 | 0 | 0 |
| 1732270458 | 146 | 163 | 30 | 0 | 0 |
| 1732268642 | 146 | 163 | 28 | 0 | 0 |
| 1732266825 | 146 | 163 | 31 | 0 | 0 |
| 1732265009 | 146 | 163 | 19 | 0 | 0 |
| 1732263193 | 146 | 163 | 19 | 0 | 0 |
| 1732261377 | 146 | 163 | 19 | 0 | 0 |
| 1732259560 | 146 | 163 | 23 | 0 | 0 |
| 1732257744 | 146 | 163 | 16 | 0 | 0 |
| 1732255928 | 146 | 162 | 1 | 0 | 0 |
| 1732254112 | 146 | 163 | 10 | 0 | 0 |
| 1732252295 | 146 | 163 | 12 | 0 | 0 |
| 1732250479 | 146 | 162 | 10 | 0 | 0 |
| 1732248663 | 146 | 162 | 14 | 0 | 0 |
| 1732246847 | 146 | 162 | 14 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)