This is the latest recevied telemetry packets stored in our database for station/object IZ0DZX-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758196706 | 414 | 0 | 0 | 0 | 0 |
| 1758195805 | 414 | 0 | 0 | 0 | 0 |
| 1758194905 | 415 | 0 | 0 | 0 | 0 |
| 1758194005 | 415 | 0 | 0 | 0 | 0 |
| 1758193105 | 415 | 0 | 0 | 0 | 0 |
| 1758192204 | 415 | 0 | 0 | 0 | 0 |
| 1758191304 | 415 | 0 | 0 | 0 | 0 |
| 1758190404 | 415 | 0 | 0 | 0 | 0 |
| 1758189504 | 415 | 0 | 0 | 0 | 0 |
| 1758188604 | 415 | 0 | 0 | 0 | 0 |
| 1758187703 | 415 | 0 | 0 | 0 | 0 |
| 1758186803 | 415 | 0 | 0 | 0 | 0 |
| 1758185903 | 415 | 0 | 0 | 0 | 0 |
| 1758185003 | 415 | 0 | 0 | 0 | 0 |
| 1758184102 | 415 | 0 | 0 | 0 | 0 |
| 1758183202 | 415 | 0 | 0 | 0 | 0 |
| 1758182302 | 415 | 0 | 0 | 0 | 0 |
| 1758181402 | 415 | 0 | 0 | 0 | 0 |
| 1758180502 | 415 | 0 | 0 | 0 | 0 |
| 1758179601 | 415 | 0 | 0 | 0 | 0 |
| 1758178701 | 415 | 0 | 0 | 0 | 0 |
| 1758177801 | 415 | 0 | 0 | 0 | 0 |
| 1758176901 | 415 | 0 | 0 | 0 | 0 |
| 1758176000 | 415 | 0 | 0 | 0 | 0 |
| 1758175100 | 415 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)